lip

DarkElegance919 · Dec 14, 2006

for me, i didn't use any drill or anything, just screwdriver. the arrows show where the screws are. 6 total. two in front dam area, two at the end (in wheel well area) on each side.

squeeks · Dec 14, 2006

http://cgi.ebay.com/ebaymotors/Blac...9QQihZ012QQcategoryZ36475QQrdZ1QQcmdZViewItem

type r lips for 80 something denars

sliver00accord · Dec 15, 2006

i have a front type lip for sale..painted sliver..and rear..fitment sucks...

squeeks · Dec 15, 2006

hey how much you willing to let that lip go shipped & everything.

hancockd · Dec 17, 2006

ok..... now im pissed....
first off i wanted to thank all that gave me their input on what to do.... i got it on there all was well... came back outside about 15 min later... one of the tabs in the wheel well ripped off...grrr.... i guess i have to buy a new one now, or find a way to mount it w/o the tab that doesnt look ghetto.

Quicksilvercord · Dec 17, 2006

Use some 3m duel sided tape.

talontsiawd · Dec 20, 2006

My mugen style lip took so effort. It's about 1/4 in or a bit less to narrow. And a bit too short. I took off some material but there isn't much there. I really just had to force it into place. It's worked fine for awhile though, but you can see the sides arn't perfect where it's attached to the bumper. You need to be looking for it to see it though.