no speedo......

[lucky lak]

I didnt an auto to 5spd swap recently. And took the ecu from the donor car. I bypassed the immobilizer the ghetto way and now itll rev out but no speedo..... I did all the wiring correctly and checked it with a chipped p28 and speedo worked fine. But now with the (paa) ecu there is no speedo again

Lmk what the issue could be thank in advanced

 

[james'99]

CEL? If so, P0500?

 

[Varnell]

Speed sensor on the transmission working?

 

[lucky lak]

Only cels were for the tps, secondary o2 and the immobilizer that has been removed

 

[lucky lak]

Yes the speed sensor works i tested it when i did the swap with a p28 chipped for b20......

 

[james'99]

No cluster swap I assume? Not that it would necessarily make a difference.

 

[xci.ed6]

check continuity of cluster wires, especially to themselves and power and gnd

 

[lucky lak]

Nope cluster was swapped when the conversion was done. And it wrkd perfectly fine. A buddy is gonna run through the wiring to double check it al

 

[lucky lak]

Still havent figured it out

 

[xci.ed6]

You said it worked when swapped?

What worked when what was swapped, and you reverted to a broken one?