CG6Lemon
Detailing Enthusiast
this is something i did while the site was down lol. The kit i used was from svc.com. took 1 day shipping only and fair prices. anyway onto the pics. enjoy
this is wut u get
wires to power it
plug in comp to test power
cut until u have black and red wire only
disconnect this. its right behind the bulb cover
looks like this when its out
pry plate off
harness should look like this when u unclip everything and unplug
cut black/red
splice power to orange and black to black and tape it up after
plug neg batt back on and test power
clean mounting surface with w/e u want
now mount the tubes and try to pull the wires back in. put the plate back on after u mounted tubes carefully
i just mounted the inverter there. the inverter powers the tubes
we can haz lights???
this is wut u get
wires to power it
plug in comp to test power
cut until u have black and red wire only
disconnect this. its right behind the bulb cover
looks like this when its out
pry plate off
harness should look like this when u unclip everything and unplug
cut black/red
splice power to orange and black to black and tape it up after
plug neg batt back on and test power
clean mounting surface with w/e u want
now mount the tubes and try to pull the wires back in. put the plate back on after u mounted tubes carefully
i just mounted the inverter there. the inverter powers the tubes
we can haz lights???