These JL speakers work with 300/4 amp?

[ryan s]

yeah, he made that one, too. the one i had on the passenger side swelled pretty badly on the bottom.

if i didnt make my own, with the one he cut as a template, i'd send him/reimburse him for some starboard. they are made to fit into the doors exactly, from total width to mounting holes. and he can do any diameter cut out.

 

[seeitgo]

Damn, i cant see the picture from photobucket, says bandwidth exceeded.

I hope laslee is still active, i would definitely look to him for some spacers

 

[ryan s]

photobucket is trying to extort $25 for a pro account from me they say i used 11GB in 6 days...4GB in exactly 12 hours 100000% impossible according to the physics of the interwebs. they seem to do it to everyone once in a while.

i can re-upload it if you want to see it again, but its basically an outline of the stock spacer but just on a flat piece of wood.

lashlee (mike) is still active on here, sometimes. a notification of a PM should reach his email inbox in any case.

 

[seeitgo]

Yeah that would be great if you can re-post the image, Thanks Ryan.

 

[bagoon316]

http://cgi.ebay.com/6-Speaker-Adapt...ltDomain_0&hash=item483a7bbd73#ht_1328wt_1163

I bought these for my Subaru, they worked amazing.

 

[ryan s]

I'll do it later this evening...away from my pics at the moment.

 

[seeitgo]

http://cgi.ebay.com/6-Speaker-Adapt...ltDomain_0&hash=item483a7bbd73#ht_1328wt_1163

I bought these for my Subaru, they worked amazing.

Thanks, hopefully those are the spacers I will need that Ryan was talking about.

I'll do it later this evening...away from my pics at the moment.

Okay, Thanks!



I got another question, is it a good or electrically sound idea to have a distribution block to input one 4 Gauge and output two 4 Gauge?

 

[ryan s]

Thanks, hopefully those are the spacers I will need that Ryan was talking about.

I got another question, is it a good or electrically sound idea to have a distribution block to input one 4 Gauge and output two 4 Gauge?

just be aware that the seller ships slowwwwwwww and you'll never be able to contact him if theres a problem. i can't remember the cutout diameter...it might be on his site car-speaker-adapters.com somewhere...

distribution blocks are just fine as long as the connections are good (that would be the weak point, electrically speaking). it's also highly advisable that you fuse whenever wire gauge changes...there are plenty of fused blocks for cheap on ebay. i would avoid knukonceptz blocks, they suck. i like streetwires (what i have now) and stinger HPM (used in the past).

heres the lashlee spacer once more...

 

[seeitgo]

Thanks, I'll contract lashlee soon!

I found these JL C2-650
(http://cgi.ebay.com/ebaymotors/ws/e...item=&sspagename=STRK:MEWAX:IT#ht_1000wt_1051)

that has these crossovers, what is the difference with these and the

TR650-CSI
(http://cgi.ebay.com/JL-AUDIO-TR650-...r_Speakers&hash=item45fb17cf00#ht_2925wt_1139)

?

 

[ryan s]

the TR set is older, i think. there's no external crossover so there's probably just a cap on the tweeter and no lowpass for the mid. the CS set has a better crossover so they'll probably sound better...