What'd you do to your accord today?

[001Stunna]

Yeah that kinda bothered me too. The cable for the sensor is also very tight right now. And there is another spot for a sensor just before the flex pipe where all the cylinders combine. So I might do it in the future.. Not sure if I care enough though

Because I also don't really mind too much that I have a snapped stud.

If i was you, i'd relocated it after all ports have combined into one. Simply as right now you're making the engine run as only that one cylinder likes it. The other 3 are just getting unmetered.

To each their own though. If you're going to do it, might as well do it right.

 

[Valet]

If i was you, i'd relocated it after all ports have combined into one. Simply as right now you're making the engine run as only that one cylinder likes it. The other 3 are just getting unmetered.

To each their own though. If you're going to do it, might as well do it right.

You guys are right though. I need to change to the other bung, but it can wait a little bit. It's not a huge deal.. at least im pretty sure it isn't Just like, you would think it would be an issue, missing a stud on the far right. But the thicker gasket seemed to have fixed it for now until I get the tools to drill it out.

They want $50 for that longer o2 harness though....

 

[dragged]

I got my car inspected .. drove to apply for jobs.

 

[DarkSideAccord]

stopped by the gas station to wash my windows.... i had at least half an inch of dust all over

 

[20-CG5-01]

Finished installing my ARP extended studs along with my 15mm spacers. 5mm are now in the front. Here is a Teaser.

 

[RedRyder]

^Steven's all herrafrush.

 

[20-CG5-01]

^Steven's all herrafrush.

Just flush . I ordered some new 12kg springs to replace my 8kg fronts, which will be going on the rears. I'll be maybe 1/2"-1" lower after the new springs.

 

[uhhkilleez]

Found a small exhaust leak so I patched it with that diy stuff from VatoZone until I get my new exhaust built.
Picked up a wheel bearing and put that on after countless months of that deafening roar.
Drove to the post office only to find out they were closed to celebrate Columbus day.

 

[ejreams]

Kept it under 45 minutes! that's good considering how long it took me last time.

Finally got this thing replaced, something is broken internally in the shock, you can hear it clank when you flip it around. Just want to make a quick shout out to Ken and F2's Warranty staff, they worked with me even when I was a bit of a pain. Thanks guys.

No more fear of bottoming out yay!

 

[wsdrummer06]

Lowered my car hard. Check my profile pic and let me know what you think!