I just did an auto to manual swap in my 02 Accord SE. I've been reading your write up on getting the speedo to work and have a few questions. I pulled a ground from my old auto harness (one of the small plugs), a power source from my old big connector, and ran the signal wire directly to the ECU, but am getting no speedo. I had to order a pigtail and the wires coming out of the back (L to R) are black, yellow w/blue, yellow w/white. From your post I gather those are ground, power, signal. I bypassed the fusebox and didn't bother with the starter wires since it starts up fine already. What am I missing? Thanks.