Recent content by scotthrbacek
-
S
More info on the Morimoto Mini H1 projectors
If you look into the back of the mini gatling gun shrouds, there are 4 posts that stick up towards you. These are for the 4 mounting screws. I found that the posts ran into the projector housing before it was completely seated. So, with a cutoff wheel in the Dremel, I cut them down by 3/16"...- scotthrbacek
- Post #32
- Forum: DIY - Do It Yourself Forum
-
S
More info on the Morimoto Mini H1 projectors
I took the housings apart last night & made a few mods to the shroud to make it seat back onto the projector farther and now it does not contact the lens. WooHoo!- scotthrbacek
- Post #30
- Forum: DIY - Do It Yourself Forum
-
S
More info on the Morimoto Mini H1 projectors
I also am having an issue with the end of the projector (and mini gatling gun shroud) touching the headlight lens. This pushes the aim of the projectors inward, giving my headlights a "cross-eyed" appearance. Any tips on pulling the projectors farther into the housings? I am using the stock...- scotthrbacek
- Post #29
- Forum: DIY - Do It Yourself Forum
