Recent content by Tito_CG3

  1. Tito_CG3

    B series TB on J32a2 lopey/surge idle?

    Any luck yet. I been tempted on buying that p2r plate adapter. Do you feel any gains with the 74mm throttle body.
  2. Tito_CG3

    6 speed swap parts list! (organized)

    Its been 3 years already sense I did my 6 speed swap i dont drive the car much but recently when I have taken it out for a spin the clutch catch point starts to move up every time I press the clutch pedal to shift until there is no catch point anymore. I replace the clutch master cylinder and...
  3. Tito_CG3

    05 tl-s brembo comparison

    Did you ever got the set up running on your car. If so what parts are required to do the upgrade? :)
  4. Tito_CG3

    Clutch pedal for swap

    For the clutch pedal you can use the 1998-2002 4clylinder 5 speed MT Accord.
  5. Tito_CG3

    AEM EMS V2 - Compatible with 1998 Accord??

    I have the AEM Series 2 Ems on my 99 Accord and it's grate no issues so far alot of people say its not worth it but It does make a slight difference once you get it tuned. Only cons is I can't make my coolant temp gauge to work :shrug:
  6. Tito_CG3

    AEM EMS V2 - Compatible with 1998 Accord??

    They probably don't list it because the 1998 and 1999 J30A1 have distributors, and the 2000, 2001, and 2002 don't have distributors instead they use ignition coils. THAT DOSENT MEAN YOU CANT USE IT ON THE 1998 OR 1999. I you really want to use the AEM SERIES 2 EMS you have to change your engine...
  7. Tito_CG3

    UPDATED: Evan's Quest for a J32 6MT 6GA

    I gather some information on the trigger sensor that goes in the transmission, we might be able to drill the hole get it in the right position, but we need to replace the accord flywheel with the 03 6Speed CL-S witch is around $500 dollars in autozone and the sensor cost around $100 to $200...
  8. Tito_CG3

    UPDATED: Evan's Quest for a J32 6MT 6GA

    I have been looking into the AEM Series 2 EMS 30-6051 it looks like this is our only solution, it says is a plug and play but with a auto engine harness and that means we need to use automatic engine with a 6speed m/t only thing we have to repin or rewire will be the speed sensor and the lock...
  9. Tito_CG3

    AEM Series 2

    I am doing a 6speed swap on my AV6 with a JDM J32A Type-S and I am wondering if someone has tried using the AEM Series 2 EMS 30-5061 before.
  10. Tito_CG3

    UPDATED: Evan's Quest for a J32 6MT 6GA

    Re: UPDATED with Wiring Issues: Evan's Quest for a J32 6MT 6GA Hey I am doing the same swap i literally have the same set up J32A Type-S, 06 6 SPEED M/T, with 03 CL-St 6 speed engine harness and ecu and my car won't pass 2k. Can u post some pictures on where exactly you drilled the hole on the...
  11. Tito_CG3

    UPDATED: Evan's Quest for a J32 6MT 6GA

    Re: UPDATED with Wiring Issues: Evan's Quest for a J32 6MT 6GA Hey I am doing the same swap i literally have the same set up J32A Type-S, 06 6 SPEED M/T, with 03 CL-St 6 speed engine harness and ecu and my car won't pass 2k. Can u post some pictures on where exactly you drilled the hole on the...
  12. Tito_CG3

    6 speed swap parts list! (organized)

    What about if instead of using the module we use the 2003 CL-S 6 speed manual ecu and engine harness? Wouldn't that work?
  13. Tito_CG3

    6 gears > 4 [6spd + 3.2 swap]...completed.

    What transmission mounts did you use? I am in the process of doing the swap I have everything I am just having trouble with the transmission mounts
  14. Tito_CG3

    6 speed swap parts list! (organized)

    Ok so I am doing the 6 speed swap on my 1999 AV6, and I am going based on this part list posted here. In this part list it says I can use the 7gen 6speed transmission so far so good, the thing is that the 03 CL-S transmission mounts don't bolt up on the 7gen 6speed transmission, so what mounts...
  15. Tito_CG3

    J32A auto to MT

    Okay so my J30A1 finally gave up so i decided its time for a change. I been looking forward to find a J32A2 MT but no luck, so my only option is to buy the Automatic J32A type-s from ebay that comes with auto engine harnes and auto ecu but i want to do a 6speed swap. My question is can i bolt a...
See more

Latest posts

Random media

This thing has some serious packing..sweet!
0511121550a
3531.jpg
decal
factory spoiler installed
Back
Top