J35a3 + 6spd manual. Which sensors need to be changed?

98V6Accord

Well-Known Member
Joined
Mar 8, 2012
Posts
96
Reaction score
7
Location
Md
I have a j35a3/rl pistons/j32a2 heads.

My accord currently has a j32a2/6 spd - stock CL-s ecu.

In order to make this j35a3 work with the 6 speed, I know some sensors need to be changed over to the manual ones. (Crank, cam etc)

If I switch to a piggyback or standalone will I still need to switch over?

If not, what all needs to be switched to drop the motor into my stock cl ecu/6 speed?

Any feedback is greatly appreciated!
 

Devin Dean

Member
Joined
May 9, 2020
Posts
17
Reaction score
1
Location
Rhode Island
Hey man I'm no swap artist, but I know a lot of J35 swappers use the stock Odyssey ECU. I guess the 6GA's can't support the fuel needed at top end, CL-S might be the same.

As for the sensors, the J35 has a knock sensor unlike the 3.0/3.2 if I'm not mistaken.

I hope this helped a little, if I find more info I'll leave it here. :)
 
Back
Top