Dude...you need tuned. Take it to a reputable tuner before you blow it up
Should be the same
Yes, we do it all time here at work.
Cheap manifold, it's cast stainless, retains heat, and it'll last....
Done a compression check? At minimum I'd do headstuds and a headgasket as good insurance.
I doubt there's many tuners left that still use it. That's 20yr old technology. Best bet would be emailing Greddy or checking their website for...
There's two bolts holding it in on the latch
Air pocket in the coolant. Burp the system again
Honestly your best bet for the lip kit is to buy the ebay urethane kit and I wish you the best of luck on the neuspeed bar
No really, dont go there. Try Honda Tech
Those ports look horrible, everything should be a smooth transition, no rough or sharp edges, exhaust side should be as smooth as possible with...
No idea, never heard of it
A gasket match on the ports and some blending of the surfaces is really all you need for a stock motor. I had mine done years ago by shop
02-05 RSX rears *might* also work.
Try Civic EP3 Rotors - 04-05 when they switched to 5lug
Centric # 121.40056
vs Accord Centric #121.40039
They're 1.5in larger diameter so...
Damn. I literally just threw an old set out I had like a month ago
This thread makes my head hurt.
The auto/manual conversion on this generation accord is easy. Everything literally bolts on aside from the minor wiring you have to perform
We use the copper/nickel alloy all the time at work for older cars & customers that don't want to pay the cost of all new factory lines. You might...
Check out Drift's DIY guide, it's about as detailed for your application as it can get.
[IMG]Look for a trans code stamped at the front of the trans close to the radiator/front engine mount. Even if it's a rebuild or a jdm trans, it...
Silver bracket appears to be correct for the car, however I can't tell what trans you have unless you take a better picture of it or maybe provide...
The only ones you could possibly mix up are the MAP & TPS sensors since they use the same connector. If you haven't already taken them apart,...
It's literally spelled out for you
Separate names with a comma.