Search results

  1. S

    Lightened OEM Crank Pulley?

    Ive had the Unorthodox Racing Lightweight Crank Pulley on my 3.0 v6 for over a year now with now issues. I replaced it when doing the timing belt job. supposedly the v6 has a harmonic balancer as well, but I havent noticed any negative effects from installing a lightweight one without the...
  2. S

    Not clear on the SRS light

    Hello all, I have a similar problem. I swapped the stock seats in my 99 ex coupe for the super awesome, amazingly comfortable 02 Acura CL/TL seats. They match perfectly and they were by far the best 80 bucks I have spent on my ride. So I wired them up directly from the battery and using...
  3. S

    UR Pulley Kit

    I have the Lightweight aluminum crank pulley on my 1999 v6 accord coupe. Swapped it over when I did my timing belt, water pump, etc. It has been about 6 months and no problems thus far. Besides it looks pretty cool to :) Its hard to say the exact power gains, but id say slightly fast...
  4. S

    Need Richie V6 harness or solution ASAP!

    Hey everyone, I just found this amazing site!!! They advertise plug and play wiring harnesses for a variety of swaps including the Jseries... they also do custom wiring harnesses with a turnaround of 5-7 days.. Can anyone say hell ya!!!?? :party52: This will likely be the solution for my...
  5. S

    Any Jacksonville locals?

    Hey everyone, from searching it doeant seem like there are many folks from the Jacksonville area on this site... any one local to the 904 or nearby? Id love to get a meet going or schedulea cruise... always seems so cool.whem u see a group of car enthusiasts cruisin... Also, i wrnt cruising...
  6. S

    J32a2 from TL type s

    Sorry its the old setup That's out of the car. The new 45,000 mile setup is still installed in the wrecked tl-s.. so i will get both setups... also will i need anything else nesodes the whole tl-s in order to do the swap?
  7. S

    J32a2 from TL type s

    So i got an update on the offer, it's now 1300 for the whole wrecked tl-s with a receipt for a new 45,000 engine and trans that was replaced recently. Anddd the old engime/trans with 100,000 miles delivered to my house.. i was mistaken, its the old setup with the semi bad trans... so im asking...
  8. S

    J32a2 from TL type s

    Hey Jarrett, Thanks for your input. I just spoke with the guy again and he still has the whole car, the engine/trans have just been pulled out.. So now I can get anything else I need for the swap to 5speed. I think this will be my cheapest option for now. If i can score everything for around...
  9. S

    J32a2 from TL type s

    Ya I will need to do some serious thinking about the best option for me... Supposed I just want to swap the top end from the j32a2... would there be in issue with my current distributor setup? It seems that the distributor is attached to the cam..? I found this link...
  10. S

    J32a2 from TL type s

    Thanks for the input RedRyder, I was indeed looking for a relatively easy swap, but after the guy said he would sell the whole setup for 400 bucks I began to think bigger. The setup was described as having a newly installed engine(60,000), but the tranny was experiencing problems prior to the...
  11. S

    J32a2 from TL type s

    hello everyone, Thank you all for the extremely helpful information. It was exactly what I needed to assure myself it would be a good purchase. I should be getting the whole setup (engine/tranny/alt/ps/etc) for $400. It seems like a crazy deal.. am i correct in thinking this? And supposedly...
  12. S

    J32a2 from TL type s

    Hello all, I have done some research and can not find the exact answers I am looking for. So here is the situation. I found an ad on craigslist for an 02 ACURA TL type s automatic, the back end is smashed in and it is for sale relatively cheap. Normally I would do more searching but I want...
  13. S

    acura cl front seat swap into 99 accord

    Finally got it all working with the wires listed above. Just took 10g from battery to under driver seat, then split the power to under the other seat. Used fuse board to add specified amp to each wire, and then grounded all of the black wires. Seats are so comfortable, and by far the best...
  14. S

    acura cl front seat swap into 99 accord

    unfortunately those are far from the only wires that I have.. There is a pigtail harness with about 22 wires.. Based off of previous posts the wires listed above are all that need power.. can anyone confirm this? Chris, how did you get yours set up? What color wires did you add power to...
  15. S

    acura cl front seat swap into 99 accord

    Hey Chris, Thanks for the response. The car I took them out of had 3.2 cl badges, but not the type s badge.. However, the seats look exactly like the front seats in this post I am going to give it another try tomorrow. I am going to take a power wire directly from battery, add inline...
  16. S

    Door unlocking and opening help.

    Door not opening from the outside is a broken outside handle. I just replaced mine (kinda ***** to get out). The plastic part on the inside that moves when you pull up on the door handle broke on mine. Also if you have a coupe, make sure you get the right door handles. 2 door and 4 door...
  17. S

    acura cl front seat swap into 99 accord

    correction. here is the link to the pdf: honda-tech.com/attachment.php?attachmentid=309203&d...
  18. S

    acura cl front seat swap into 99 accord

    I do have a stock drivers power seat but the passenger side is manual. Also the harness coming from the stock seat only has 5-6 wires, whereas these new seats have 22+.. here is the link for the wiring diagram I found...
  19. S

    acura cl front seat swap into 99 accord

    I guess I did not search enough. I believe I found my answer: I will hopefully get a chance to try this on Wednesday. Great, straight-foward information if it works!!
  20. S

    acura cl front seat swap into 99 accord

    Hello everyone, I was able to score some near mint condition acura cl seats for $40 each. I do not know the year but it was definitely a 2nd generation 3.2 cl (I did not see type s badges if that matters). Anyways I have been struggling to interpret this information...
  21. S

    What else should I upgrade?

    Turns out it was something as simple as a loose ground wire. I did not use loctite or lock washers when upgrading grounding wire, and one of them had become loose. The looser it got the worse the problem got...(that's what she said.. I know).. Thanks for everyone's help. it is such a relief...
  22. S

    What else should I upgrade?

    Hey guys, Since it seems that a ground/power wire could be the cause, I wanted to add that I have recently upgraded the ground wires. The problem started happening at least 3-4 months after I upgraded the ground wires, but I figure I would make mention. Here is the link to DIY I followed...
  23. S

    What else should I upgrade?

    Hey that would be awesome if you found any likely culprits. This problem is becoming EXTREMELY annoying haha.. I have a Haynes manual, would you recommend i look in the wiring diagram section for anything that is connected to all of the symptomatic devices? Let me know if you have any more...
  24. S

    What else should I upgrade?

    well, I replaced the ignition switch but the problem persists. Most often the power to the radio dies then comes back on (up to 5-10 times per trip). And also sometimes the radio and all of the gauge die and then dash light blink and power comes back (a lot of the time the abs light remains on...
  25. S

    What else should I upgrade?

    Ok I see. While I haven't actually replaced the switch I did buy it today. I plan on installing it tomorrow after work so I will check the old one for signs of burning. The problem is starting to get really annoying lol and it has evolved further to the radio losing power then restarting up...

Latest posts

Random media

DSC00051
custom system, slammed on kyb struts and egay sleeves
5725.jpg
IMG 1562
Front Left
Back
Top