Search results

  1. VancouverAccord

    A Good HID kit??

    oh and as for your original question OEM ballast are the best out there. Some of the better ones include Denso, Matsu****a and Hella.
  2. VancouverAccord

    A Good HID kit??

    If you can wire an HID kit, you can wire a retrofit. IMO Retro is the only way to go HID. The difference is night and day. :lawl: No pun intended. TRS has quality products and great customer service. Since this is your first retro fit I would recommend getting mini H1, they are very easy to...
  3. VancouverAccord

    DIY Coupe backup cam install

    Great write up bro. Best 20 bucks I've spent.
  4. VancouverAccord

    What'd you do to your accord today?

    Oh and I changed my wiper blades today.
  5. VancouverAccord

    What'd you do to your accord today?

    Glad your ok Red, its scary how they're allowed to re-tread those truck tires. Thank god they don't do it on passenger tires. I never spend any more time than I need too behind or beside them.
  6. VancouverAccord

    USDM Rear Fog Coupe

    Nope. The one I saw was newer. I don't remember which model. I think it was a RS4. Here is the only picture I could find. You can only see one in the picture but both sides had them.
  7. VancouverAccord

    New member from North Carolina

    I think the wilwood BBK is under $1000.
  8. VancouverAccord

    Will 05 TL 6 Speed Knuckle with Brembos fit a 98 4cyl?

    Any update? Were you able to get these on without adapter brackets?
  9. VancouverAccord

    DIY 98-00 RSX Steering Wheel Single Stage Conversion

    Very nice. This will open up much more options for both single and dual stage vehicle owners. Thanks for the info!:favorites13:
  10. VancouverAccord

    Brake lights not working

    I also agree that it is unlikely that all bulbs went at the same time. Is your third brake light also not working? I'm pretty sure that the third brake light on our accords is run through a separate circuit so I doubt its the fuses. Check the brake switch I had one go bad on my car causing...
  11. VancouverAccord

    USDM Rear Fog Coupe

    Great idea! what if you used both sides? I saw an audi the other day that had very similar oem rear fogs in the taillights on both sides. I don't think the guy even knew his fogs were on. :facepalm:
  12. VancouverAccord

    Replacing Blown suspension/strut on v6 sedan

    hmm, I would have thought that at least the fronts would be different due to the heavier V6 engine but I guess its just different springs.
  13. VancouverAccord

    Replacing Blown suspension/strut on v6 sedan

    They have different part numbers so I do not believe they are the same. 2000 V6 Coupe: 51601-S80-A07 SHOCK ABSORBER ASSY., R. FR. 51602-S80-A17 SHOCK ABSORBER ASSY., L. FR. 52610-S80-A02 SHOCK ABSORBER ASSY., R. RR. 52620-S80-A12 SHOCK ABSORBER ASSY., L. RR. 2000 V6 Sedan...
  14. VancouverAccord

    Check engine light!!

    As redryder said egr clean is an easy DIY. If you have already changed your plugs I would also inspect and change your wires, distributor cap, and rotor. I had the same problem minus egr and it was due to an old plug wire arcing. I changed the parts mentioned and it was running like new.:thumbsup:
  15. VancouverAccord

    SRS light on after cluster pull

    Our honda's have a common problem of a "Hiccup" in the system causing the light to turn on. It could just be a coincidence that this happened when you pulled your cluster. Good luck.
  16. VancouverAccord

    SRS light on after cluster pull

    Paperclip method is very easy, don't be afraid. I've done it a few times for my steering wheel replacement and CL-s seats. If you reset it and it comes back on then you have a bigger problem and will have to pull the code. (also very easy to do)
  17. VancouverAccord

    HID relay harness?

    You should be fine without. But please do everyone a favor make sure you re-aim your headlights. The HID will will cause glare in your stock reflectors and blind oncoming drivers.
  18. VancouverAccord

    The "DOES IT FIT?(parts)" Thread

    cl-s and tl-s are perforated, cl and tl are not. Yes one from the tl will fit but it is the same as the leather accord one. I would hold out and try to find a type s one.
  19. VancouverAccord

    Jv6! Ride of the Year

    Congrats buddy!
  20. VancouverAccord

    Help with fog install!

    You can also wire the switch up easier if you do not want/are required by law to have your fogs turn off when your highbeams on.
  21. VancouverAccord

    Help with fog install!

    For light output and ease of installation OEM is the only way to go IMO. But if your on a budget then civic fogs will do.
  22. VancouverAccord

    Endlink Question(s)

    When I did my TL-s RSB, I used the TL endlinks. Visually they look identical to Accord ones and fit perfect. When I purchased mine, the TL endlinks were actually cheaper than the Accord ones. Although the Moog one's are much thicker. Good luck!
  23. VancouverAccord

    The "DOES IT FIT?(parts)" Thread

    No, TL/CL have an 5 pin connector where as Accord has an 8 pin connector if I remember correctly. They both only use 5 wires though.
  24. VancouverAccord

    AEM SRI Issues

    Good job! Looks even better than before!:waytogo:
  25. VancouverAccord

    OEM sideskirt and rear lip removal

    YOU ARE A GOD! I will look into those places about getting a template. Thanks again for your help. I will PM you my email.

Latest posts

Random media

IMG 20120114 234736
0907292004000
image zpsa49628b9
IMAG1298
20201107_152336
Back
Top