Search results

  1. WHEEELMAN

    FS: 98-02 Accord V6 Oil Pan -- SOLD!!!!

    Re: 98-02 Accord V6 Oil Pan - NEW, Unopened Box Ready to make a deal.
  2. WHEEELMAN

    J32A2 Info

    1. have current Accord key - reprogrammed by dealer for your specific ECU --$$$ 2. replace Immboilizer chip w/ bypass chip from RPM systems(see J32a2.com) so CEL light is not thrown --$$$ 3. remove Immobilizer chip and deal with the CEL light - FREE!
  3. WHEEELMAN

    J32A2 Info

    Send me a PM with your questions and I'll try to help. Like I said, I had someone else do the swap for me. I can only give you bits and pieces of info.
  4. WHEEELMAN

    J32A2 Info

    might be because you are a new member over there... Mechanically it all goes in fine. The wiring is the hard part. I would find someone in your area who knows both Acura and Honda wiring schematics to do this. It is not a simple plug and play swap for the electrical part. I cant give you...
  5. WHEEELMAN

    J32A2 Info

    I think the tranny bell housing will bolt up to the J32A2. 1 problem. J32A2 has a knock sensor that is monitored by the ECU. J30A1 does not have a knock sensor and the J30A1 ECU will not montior the knock sensor, so you are going to have to use a 01-03 Acura CL/TL ECU. That Acura ECU controls...
  6. WHEEELMAN

    C-Pillar Crossbar

    lol. you don't wanna know how much I paid for my J's Racing C-pillar bar.
  7. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord Yes it is.
  8. WHEEELMAN

    FS: 98-02 Accord V6 Oil Pan -- SOLD!!!!

    Re: 98-02 Accord V6 Oil Pan - NEW, Unopened Box bump.
  9. WHEEELMAN

    FS: All items sold!!!!

    Re: UNICHIP = 00-02 Accord V6, Autometer gauges and single pillar pod bump
  10. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord don't mind at all... I have a low spinal cord injury - 1st Lumbar vertebrae. So basically waist down I have no movement, but I do have very little quadricep function. Each injury is different. I'm...
  11. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord updated original post with review. just read it.
  12. WHEEELMAN

    FS: All items sold!!!!

    Re: UNICHIP = 00-02 Accord V6, Autometer gauges and single pillar pod Autometer electrical tranny temp gauge/Single gauge pod SOLD $65 shipped for the Cobalt tranny temp gauge
  13. WHEEELMAN

    FS: 98-02 Accord V6 Oil Pan -- SOLD!!!!

    Re: 98-02 Accord V6 Oil Pan - NEW, Unopened Box dont need it, wont use it. send me an offer or lowball, we'll start somewhere and make a deal -- like the Gameshow!! :wub:
  14. WHEEELMAN

    FS: All items sold!!!!

    Re: UNICHIP = 00-02 Accord V6, Autometer gauges and single pillar pod open for offers, bundle deals...
  15. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord Very noticable difference with the Ultra Racing brace. Still testing out the Cusco effects. So far, kinda hard to tell any difference with the Cusco added, but hey, if you can snag one, it wouldn't hurt to...
  16. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord not that I am aware of. Even if you took pictures, I would still want to mount it up to see to make 100% sure. That's really the only way to be sure. All it takes is someone near me to drive to my...
  17. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord ehh, haven't measured but at least 1 - 1.5 inches on the Ultra Racing. Cusco, a wee bit more. ** But know this. My sub-frame has been lowered 7/8 of an inch to accomodate the intake and provide hood...
  18. WHEEELMAN

    Any alternative transmissions swaps?

    hold up everybody. Don't answer that. Now is the perfect time for this guy to learn how to ....SEARCH!
  19. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    Re: Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord not sure. I have never looked at the chassis of a 4 cylinder. I don't know anyone in my area with a 4 cylinder or else it would already be confirmed.
  20. WHEEELMAN

    Ultra Racing lower 4-point brace & Cusco lower Tie bar installed on CG2(01 Accord)

    The U/R 4 point brace uses existing hardware. Just mount it up with your OEM bolts. Same for the Cusco. !! There is only about 1/4 of an inch between the flex pipe and the U/R brace. Hard to tell in the pic but theres some room there. !! Also, I'm 100% sure the U/R brace will fit 98-02 V6...
  21. WHEEELMAN

    FS: All items sold!!!!

    Re: UNICHIP = 00-02 Accord V6, Autometer gauges and single pillar pod bump
  22. WHEEELMAN

    FS: 98-02 Accord V6 Oil Pan -- SOLD!!!!

    Re: 98-02 Accord V6 Oil Pan - NEW, Unopened Box bump. offers?
  23. WHEEELMAN

    Northwest Gerogia/Georgia tornado -- roll call/check in

    Hey guys, I'm posting this from work as my home Internet is down. Northwest Georgia was hit by a few Tornados last nite. For some people/areas, There is no power, internet and phones. There are a few deaths in our area also. City of Ringgold is completely shut down. That area is about 10...
  24. WHEEELMAN

    engine bay cover

    ^ what he said.... and it traps heat. but, I would like to cover up the ABS system and maybe a few other components with some fancy sheet metal work. I see where your coming from though. You would need to do some custom work for your idea.
  25. WHEEELMAN

    Moneypit: A Dyno Casualty

    Well man, on a good note: We know you can build a solid engine and turbo setup. Ain't $hit we can do about the mechanical aspects when they decide to crap out on us, even though we take our time, double check and do it right.
Back
Top