Search results

  1. 9

    Replace cat with straight pipe?

    Ok, I have DC sports headers with their J pipe. I had straight pipe after the cat to 2 mufflers and there wasn't much low end torque. I had two resonators installed in between the cat and mufflers and it helped. I'm not going through emissions anymore, so this shouldn't be an issue.
  2. 9

    Replace cat with straight pipe?

    If I remove my cat and replace it with straight pipe/muffler/resonator would this be a bad idea? Post cat I have 2.5 inch piping with 2 resonators to 2 flowmasters. Would I lose even more back pressure and low end torque?
  3. 9

    Honest opinion on DC Sports headers

    I've had ceramic dc sports on my 3.0 for about 7 years...no issues or leaking. Never put header wrap on them. Some rust is there, but oh well. Headers intake exhaust - tuned and got 25 extra HP. Go for it!
  4. 9

    Turbo info

    6 speed conversion and boost!
  5. 9

    TL 6 Speed ECU compat. with J35/32/37 swap?

    It's just the heads from an Auto 01 cl-s J32a2 Mdx block Tl-sh awd intake manifold. I read on your swap you used the Auto Cl-S ecu. If I can go that route with some splicing it sounds better. I'm not concerned with some minor issues. I'm getting historic tags next year...
  6. 9

    TL 6 Speed ECU compat. with J35/32/37 swap?

    Thanks for your responses. I was going to use the j32a2 manual wiring harness. I'm not sure how much of my 98 accord I can use. I'm calling around to look for a 03 manual cl-s ecu. I got the tl because I saw the key and ignition with it. Didn't bother to do my research :facepalm:
  7. 9

    TL 6 Speed ECU compat. with J35/32/37 swap?

    I have a frankenstein motor and wanted to try a stock ecu before getting the standalone AEM. J35 MDX block (RL pistons) J32 CL-S heads J37 TL-SH IM 05 TL 6 speed Trans ------------- I came across an 04 TL 6 speed ecu. Can I get this to work or will I need an MDX/CL ecu? Thanks for any...
  8. 9

    Front Defroster not blowing?!?!?

    Replaced my blend door/mode control motor. Every mode works! $6 at a junkyard!
  9. 9

    2000 Honda Accord Coupe EX J swap Turbo

    Were you satisfied at all with the j35/j32 AEM v2 6 speed swap? I'm in the process of this now. Hoping close to 300whp
  10. 9

    J35 swap - best motor mounts and axles???

    I'm looking at the innovative motor mounts. Am I looking for 98 accord mounts? 01 mdx (block) mounts? Are any of these compatible with eachother?
  11. 9

    J35 swap - best motor mounts and axles???

    Thank you very much!
  12. 9

    J35 swap - best motor mounts and axles???

    Swapping into my 98 v6 accord (screen name). Trying to find the best axles (05 tl tranny) and the best mounts for my j35. Any recommendations? Thanks in advance.
  13. 9

    Quick mods question for j30a1 (new user)

    I have a 98 v6... Aem v2 intake Dc sports headers Orthodox lightweight pulleys Throttle body spacer 2.5 inch straight pipe (recently put 2 resonators in) to 2 flowmasters Have an aem fuel ignition controller... Dyno was 150 whp! Tuned with aem fic to 188. That darn automatic tranny I tell...
  14. 9

    01 MDX block compat. with 05 TL 6 speed?

    I'm gonna start in a month or so. Maybe a donor civic for some conversion parts would help. Should be fun!
  15. 9

    01 MDX block compat. with 05 TL 6 speed?

    Alright thank you. I was a bit concerned. Swapping in a few months. It's been about 5 years in the making lol. I'm thinking about Aem ems 2 standalone for the computer....would you recommend anything else?
  16. 9

    01 MDX block compat. with 05 TL 6 speed?

    Swapping and converting my 98 accord. I have mdx block/cl type s heads/rl pistons/j37 im The transmission I was able to get a hold of was an 05 TL 6 speed...is this a direct bolt up? Different bell housing? Can it be custom fabricated? Thanks ahead!
  17. 9

    Fuel Gauge in cluster won't move?!?

    If I replace the needle with my other cluster would there be a chance that it would work? The other one works fine.
  18. 9

    Fuel Gauge in cluster won't move?!?

    The fuel gauge was halfway up even with it off. It won't reset or move
  19. 9

    Fuel Gauge in cluster won't move?!?

    I picked up an instrument cluster from a junkyard and everything works except for the fuel gauge. It's stuck in one spot. Is there any way to fix this? The front of the cluster is the same, the rear is a bit different. Maybe an 01 or 02 accord. Mine is a 98. Thanks in advance!
  20. 9

    Front Defroster not blowing?!?!?

    Right, I'm thinking it's either the mode control motor or the selector on the dash went bad. Just not sure if something broke under there. That picture looks fine? Thanks for your help
  21. 9

    Front Defroster not blowing?!?!?

    When the defroster is on, its comes out of the front vents only...unless its on defrost and feet...then feet and front vents will be on
  22. 9

    Front Defroster not blowing?!?!?

  23. 9

    Front Defroster not blowing?!?!?

    Pls help! Front vents work fine...feet vents work fine...rear def. Works fine. With car and air off i hear a humming when front vents are selected. With def on (ac on/off and/or feet on/off) I have nothing blowing. My ac works fine... Checking the cabin filter now. Anybody...
  24. 9

    My 98 Accord Coupe V6 (Black Currant Pearl )

    Have like 6000 songs on it...movies and videos
  25. 9

    My 98 Accord Coupe V6 (Black Currant Pearl )

    Found in junkyard $50 a piece... they want like 500 online! Comfortable as hell... having power in passenger seat is pretty cool. Hooking up the heat will be another project

Latest posts

Random media

rolling008
7671.jpg
823.jpg
Now that's a clean car :)!!!!!!
6914.jpeg
Back
Top