Search results

  1. soccerchamp16

    Walkin' In Memphis : Fall Meet 2013

    Put me down as going, i'll make it up there one way or another
  2. soccerchamp16

    Port and polish?

    Thanks for the info man, I called and talked to a local machinest and for what I wanted done it would cost me $700 at that shop plus a TB. So i'm not going to end up having it done. I'll do it myself if I happen to run across an extra intake manifold or runners for cheap. I'll also keep an eye...
  3. soccerchamp16

    What'd you do to your accord today?

    Clay bared my car, wax is tomorrow :thumbup:
  4. soccerchamp16

    Port and polish?

    Thanks for the info on it, i'll PM one of them.
  5. soccerchamp16

    Port and polish?

    It's not recommended to polish to a ultra smooth finish because the fuel will just bead up on it. Port and polish but without polishing to a super smooth finish.
  6. soccerchamp16

    Port and polish?

    I know what i'm talking about, just wanted to know basically if anyone has done it on the J engine and what throttle body. Seems like I have a choice between Blox and Skunk 2
  7. soccerchamp16

    Port and polish?

    I was thinking about getting my intake manifold and runners ported and polished... Also with a bigger throttle body. Question is, is there a particular brand for a aftermarket throttle body I should lean towards? And would this be beneficial enough to do? No i'm not boosted. 99' V6 Edit...
  8. soccerchamp16

    nay or yay camber kit

    You don't need a FRONT camber kit, you will need a rear most likely. Getting a front camber kit usually causes more problems such as slapping your strut tower. If you want to be truly "slammed" you will probably need one but you will hit your strut towers and probably end up having to cut a hole...
  9. soccerchamp16

    Walkin' In Memphis : Fall Meet 2013

    Put me as on the fence, cause thats a 7 hour drive from where im at. Unless I can roll with you RackedOut
  10. soccerchamp16

    Strange Sound

    If it was replaced recently I wouldn't worry about that being the cause, those don't tend to seize often.
  11. soccerchamp16

    Strange Sound

    Check and see if your automatic tensioner pulley is working or not, mine started making a odd sound and soon after my AC/Alternator belt snapped. My auto tensioner ball bearings seized up. But if you've driving it for a few weeks that might not be it. Worth a shot to check it out though.
  12. soccerchamp16

    What's your mileage?

    17-18 mpg city V6 not stock
  13. soccerchamp16

    What'd you do to your accord today?

    Roy Miller scrapyard off of 380 and 75. Little far away from plano, maybe a 45min drive. Some friends and I are going to hit 2 others sometime next week.
  14. soccerchamp16

    What'd you do to your accord today?

    Went to a scrapyard and found 4 6th gens and got some interior parts such as leather shifter knob, shifter trim and other misc parts! All for $20!
  15. soccerchamp16

    What'd you do to your accord today?

    How hard was the valve adjustment?
  16. soccerchamp16

    What would your next car be?

    Infiniti G35,G37 coupe!
  17. soccerchamp16

    What'd you do to your accord today?

    Shaved down my bumper tabs some more, threw a O-ring on part of my Vtec solenoid and threw on another spark defouler onto my O2 sensor (this now totals to 3 defoulers :wtf1:
  18. soccerchamp16

    FS: Junkyard Run

    I'll PM you about the cupholders and trim, thanks!
  19. soccerchamp16

    What'd you do to your accord today?

    Then they should be able to do it no problem!
  20. soccerchamp16

    What'd you do to your accord today?

    Yeah flush with the ground! But beware they techs at NTB seem to have never seen a camber kit before so i'd go back there with them and explain how it works and stand back there with them while they do it to make sure it gets done right.
  21. soccerchamp16

    Silver

    Silver
  22. soccerchamp16

    Silver

    Silver
  23. soccerchamp16

    What'd you do to your accord today?

    I'm as low as you can go without having serious negative camber. I went to the NTB off Preston & Main because I have a year alignment with them and they have a flat rack. The NTB off of 121 & Custer also has a flat rack FYI. I also stand back there with them and tell them how I want it to...
  24. soccerchamp16

    What'd you do to your accord today?

    She got an alignment :D
  25. soccerchamp16

    What'd you do to your accord today?

    Theres no way i'd use that brush! LeAccord hit it right on the head with the soap!

Latest posts

Random media

5974.jpg
A V8 Vantage before and after. Made it into an magazine ad, adding some graphics and a slogan which I believe defines Aston Martin. I made up the
DSC 0077
110 zps5dbd45e8
1947.jpg
Back
Top