Search results

  1. kn0x47

    Illegal to work on your car

    "GM, Ford, And Others Want to Make Working on Your Own Car Illegal" https://www.yahoo.com/autos/s/gm-ford-others-want-working-own-car-illegal-160000229.html?soc_src=unv-sh&soc_trk=fb&fb_ref=Default ^^Clicky^^ cliffnotes: American car companies and a few others want to make it...
  2. kn0x47

    ★ Russianred's Turbo Build Thread! ★ *UPDATED 4/15* ★

    :wave: been wondering if you still had this car or not
  3. kn0x47

    Did I pay too much? (calipers, rotors, pads)

    if they used oem parts then the price is normal.
  4. kn0x47

    Smell of exhaust in car

    from what i understand, that's an exhaust leak and it's probably the gasket between the header and block. might as well replace the other 2 gaskets at the header too. Also check for cracks in the header
  5. kn0x47

    Front sway bar issue

    Cheaper production cost plus the oem rsb is solid anyways. Solid rsb won't hurt a cars handling like a solid fsb would. The less weight on the front end of a car the more nimble the steering will feel
  6. kn0x47

    Front sway bar issue

    haha yup. i spent several semesters calculating torsional and linear forces. no problem
  7. kn0x47

    What'd you do to your accord today?

    front lip hasnt been on the car??? aw so depressing
  8. kn0x47

    Front sway bar issue

    I was going to but it was easier just to leave it on. you just need an allen wrench and a regular wrench to remove endlinks. Mine were easy to remove but mine weren't rusted either. nah a solid bar doesnt make it more rigid sense its a torsional force. plus the reduction is weight is more...
  9. kn0x47

    Front sway bar issue

    I have the eibach. Yeah I just used the outer edges of the bushings to center the bar. I think you'll have to have the car on a lift to get the fsb out with out disconnecting the exhaust. A solid fsb isn't better. Hollow bars are better
  10. kn0x47

    Front sway bar issue

    Just wear and tear. Replace the loosen both brackets that hold the bushings, replace that one/both and recenter the bar. You could also remove the whole bar to make sure it isn't bent. You'll have to disconnect the exhaust for that though. I still have my OEM fsb if you want it
  11. kn0x47

    What'd you do to your accord today?

    ^noice
  12. kn0x47

    What to look out for?

    If a head gasket is leaking then it'll be a major leak. Check where the radiator hoses meet the motor. I used to have a small leak where the top radiator hose met the motor. Just needed a new hose and clamp. Also the oring behind the distributor is known to leak and causes oil build up on the...
  13. kn0x47

    Alignment

    if you're subframe has to be replaced then the spot where the radius arm bolts to the subframe just have some major damage
  14. kn0x47

    Import Alliance - Summer 2015 Meet

    i'll be there :andy:
  15. kn0x47

    FS: 2002 Honda Accord V6 Coupe (Former Showcar) - $7500

    Holy crap you still have it. At first I thought someone bumped an old thread
  16. kn0x47

    PuzzleMaster94's J32 6MT 1999 Accord EX-L V6 Coupe (56k)

    Re: PuzzleMaster94's 1999 Accord EX-L V6 Coupe (56k) *Rotiform Content* Bahahahaha. Yeah that's Evan driving
  17. kn0x47

    WTB: Ballast for s2k retrofit

    The retrofit source sells used denso ballast for $30. check their closeout section. Their free shipping coupon code won't work on closeout items but code TRSFBLIKE will get you 5% off.
  18. kn0x47

    Upgrading for Internals

    ^yup. you'd be better off buying a J32/6 speed to start with than wasting money with your j30. If you're doing low boost then there's no point in wasting money on forged internals
  19. kn0x47

    Brake lights always on after connecting a spoiler.

    i'd recommend keeping the orange wires for the stereo disconnected
  20. kn0x47

    My 6th Gen Accord Coupe

    car's looking good. welcome to 6ga
  21. kn0x47

    Replacing suspension mounting parts

    That stuff is designed to last forever. Just check your bump stops to see if your need new ones. Konis come with their own hardware that replaces over half of that
  22. kn0x47

    What to do to a car that sat its whole life?

    replace oil, spark plugs, tranny fluid, and coolant. put some seafoam in the fuel tank and fill it up. After that just check all rubber parts to make sure they haven't dried out and cracked
  23. kn0x47

    RR's '99 coupe EX-L

    Re: RR's 3.2L '99 EX-L Coupe 6MT that's an awesome idea. can't wait to see it
  24. kn0x47

    What'd you do to your accord today?

    well i didn't do anything to the accord but my subie now has auto up and down driver and passenger front windows:) it's a nice little feature
  25. kn0x47

    New guy from alabama!

    welcome to 6ga. what part of alabama are you in?

Latest posts

Random media

IMG 20120619 144302
IMG 1068
Cat -Back SRS Turbo racing exhaust...I removed the silencer to give the true deep sound
IMG 1982
IMG00032
Back
Top