Search results

  1. kn0x47

    Street Driven tour/SouthrnFresh ATL

    25S_3pgU5rY When: Saturday August 20th at 9AM EDT Where: Atlanta Motor Speedway, 1500 Tara PL, Hampton, GA 30228 Check out the streetdriven tour or southrnfresh website for tickets. General Admission presale is $20 The event will include autocross, drifting, and a showcase area...
  2. kn0x47

    Caliper Brackets

    derek, so which calipers are you wanting to use on the rear? yeah if you (or anyone) could verify most of those measurements that'd be great.
  3. kn0x47

    What'd you do to your accord today?

    if you get the squeak to go away let me know. mine has squeaked for years
  4. kn0x47

    Kn0x47's interior work

    :thumbsup: thanks man
  5. kn0x47

    Seat power and heat wiring diagrams

    no it's not prewired. You'll have to add all the wiring
  6. kn0x47

    Kn0x47's interior work

    Console is practically finished. Got the bottom of the dash panels trimmed and installed. Luckily I was able to retain all the factory clips The passenger side console trim piece had deep scratches so I used filler primer and sanded it. Giving it a few days to fully cure before I wrap and...
  7. kn0x47

    Headlight sealant question

    +1
  8. kn0x47

    Sketch o5's 2013 Scion FR-S 6MT

    :thumbsup: i thought about blackhousing the tails once i get one but saw how people have to cut them open and screw that crap. you gonna red-out the tails?
  9. kn0x47

    Kn0x47's interior work

    thanks man. it's adhesive backed felt tape i got off amazon. 9 bucks for a 50 foot roll. it seems to be pretty good stuff. i've got diamond stitched arm rests for the doors too, just not installed yet.
  10. kn0x47

    Kn0x47's interior work

    thanks guys. heater switches are the factory cl switches
  11. kn0x47

    Kn0x47's interior work

    Figured i'd take some detailed shots... Custom scan gauge trim is assembled. used a flat black and gloss metallic black to wrap the pieces in. 03 Cl console by Jonathan Boothe, on Flickr 03 Cl console by Jonathan Boothe, on Flickr Console trim is wrapped and felt added to the back of it 03 Cl...
  12. kn0x47

    RR's '99 coupe EX-L

    grey
  13. kn0x47

    FS: 98 99 sedan wing West kit

    If you decide to sell the side skirts separately and ship let me know. glws
  14. kn0x47

    Kn0x47's interior work

    nah that's an ultrafire flashlight. the cheap ones at lowes aren't very good. the Ultrafire is really bright if you find a real one. most you'll find are knock-offs. I prefer the refun xml-t6. it's a little bigger, requires it's own type of battery and charger but they're really bright and cheap...
  15. kn0x47

    Kn0x47's interior work

    More progress. Right console trim still needs some trimming before it's wrapped then the radio bezel and other pieces will be wrapped to tie it all in together Sent from my SM-G930T using Tapatalk
  16. kn0x47

    Car Grumbling, lower idle for a few seconds *Troubleshoot*

    yeah i'd say clean your iacv too. if its eating brakes then you probably have a seized caliper
  17. kn0x47

    RR's '99 coupe EX-L

    Nope. Didn't notice the paint was thinning until I was starting to wrap it
  18. kn0x47

    Camber help

    camber shouldnt vary that much from one side to another. Is your caster the same on both sides? I'd recommend the top listing
  19. kn0x47

    Complete strut assembly?

    check out rockauto they have the monroe and kyb quick strut kits under "suspension kit." not many brands make quick struts for our cars. Monroe and kyb are supposed to be good oe style struts. I worked at advance auto for 2 years and sold a lot of monroe. never had any complaints about them plus...
  20. kn0x47

    RR's '99 coupe EX-L

    mirror looks good. yeah my paint is just as bad. there's actually an area on the roof where you can see the primer. dunno how the paint thinned out that much
  21. kn0x47

    Kn0x47's interior work

    The two bottom panels of the dash need to be trimmed, wiring for the power outlet in the armrest and finishing this trim piece to fill up the gap between the console and dash. I put a big gash in it with the router so now I'm working on filling it Sent from my SM-G930T using Tapatalk
  22. kn0x47

    Kn0x47's interior work

    Made more progress on the cl console. Custom shifter trim made and shift boot installed Sent from my SM-G930T using Tapatalk
  23. kn0x47

    What'd you do to your accord today?

    Yup shouldn't be a problem. Just lmk Sent from my SM-G930T using Tapatalk
  24. kn0x47

    Sketch o5's 2013 Scion FR-S 6MT

    aimgain/stancenation kit is nicer than the rocket bunny. The fronts are complete fenders and the rear don't have exposed rivets. personally i want the vlene kit
  25. kn0x47

    Sketch o5's 2013 Scion FR-S 6MT

    haha yeah i should have one within a year

Latest posts

Random media

9/2008
Headlight was turning yellow from neighbors sprinkler so bloody tint it is.
i love my honda
20161110 214811
100 0806
Back
Top