Search results

  1. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    deleted
  2. Bense

    H23a Vtec swap

    I cannot express how jealous i am of you right now for this. Grrr
  3. Bense

    H23a Vtec swap

    Looking good Craize. Any way that you can give us a nice clear picture of your head stamps?
  4. Bense

    Thoughts on tranny choice

    the t2t4 is geared nearly identical (excluding the final drive) to an integra GSR trans. It comes of no surprise that both the b18c and the h22a have a rod/stroke ratio of ~1.58 The k20a2 has a slightly higher r/s ratio of 1.62, so in theory, that engine would rev higher, and have a...
  5. Bense

    Thoughts on tranny choice

    http://www.teammfactory.com/gearcalculator.php?kmh=0&tirewidth=205&tireprofile=50&wheelsize=15&tirediameter1=23.07&maxrpm1=8000&finaldrive1=4.266&gearratio1=3.285&gearratio2=1.956&gearratio3=1.344&gearratio4=1.034&gearratio5=0.787&gearratio6=0&trannytype=8&tirewidth2=205&tireprofile2=50&wheelsize...
  6. Bense

    temp gauge help?

    +1 Also, FWIW, i just bought a 98-99 cluster for $75
  7. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    wut
  8. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Currently. Civic radiator for temporary use because I'm impatient. Last night when I test drove it, I took it up to 6200RPM and it lost all power and I struggled to make it home. I'm going to go test the ignition coil, ignitor, and other components of that distributor, and install the...
  9. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    On my F23A1 harness I clipped the CKP plug off, and gave myself ample length knowing that I'd be re-soldering it. I then undid my harness and pull the wires all the way over to the distributor area. With that plug, and the original F23A1 distributor plug I made the plugs that stayed...
  10. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Removed the buttlerfly plate Swapped out JDM H23A (left) with the Accord F23A1 (right) oil pressure sensors so that I didn't have to change the plug on my F23A engine wiring harness. All of the F23A1 internal distributor wiring in one shot. Reworking the engine harness. H23A1 manual...
  11. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Okay.
  12. Bense

    READ: Format for Member's Rides

    In the second half of 2014, who uses 56k? I know not one person that does. The only instance in which I encountered 56k in the past was connecting to a terminal on a datacenter in rural south america to initiate a database dump. Who comes to a showcase sub-forum where the objective, and...
  13. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    I found the culprit of my fuel leaks. I mounted the FPR upside down. Oops. Engine started with the F23A1 PAA ECU, and ran smooth long enough for me to gently move the car off of the ramps that were under the rear wheels. I pulled the ramps out, and moved the car out of the car bay. I'll need...
  14. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Swap is certainly still being worked on about every other day. I have taken my time with every single step along the way. Things that are covered in grease, crud have been purple powered and scrubbed. Rather than extending the CKP sensor wires over to the distributor, I unwrapped my harness...
  15. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Once again, Rosko (Rosko Racing) has managed to help me out by sending me a mystery box of random F/H gears. Here's what I have found. Assuming that the values listed in these tables are correct http://honda-tech.com/showthread.php?t=2548441 Rosko Mystery Gear Stack #1 - JDM Prelude Si - M2K4...
  16. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    Thanks Jason! At 31, I don't see much use in talkin' the talk if you ain't walkin' the walk. One of my most recent projects was building a workstation which has redundant data storage, so that I don't lose any data...
  17. Bense

    Bense's H23A Swap HowTo & Discussion Thread.

    The purpose of this thread is for me to post pictures, discuss my findings, address the obstacles that I will need to overcome, exchange ideas, and to serve as my rolling write-up of how to perform this engine swap. Once I have completed all tasks, and have sufficiently tested this setup (for a...
  18. Bense

    H22 Swap

    Coincidentally, The reason that I am in a rush to get my blue top H23A in my '01 Accord I4 5MT is so that I can have it operating sufficiently before I begin working at the BMW manufacturing facility that we have in Greer.
  19. Bense

    H22 Swap

    I know the exact outcome that I want to result from my project. It is a relatively common project that others have done before. There is no revolutionary obstacles to overcome, there no ground to be covered that has not been covered before. This is a recipe, a procedural outline of the steps...
  20. Bense

    H22 Swap

    This is what I currently am in the process of doing.
  21. Bense

    Hi.

    Oh ok.
  22. Bense

    Hi.

    ??
  23. Bense

    Hi.

    I'm in the middle of putting a "blue top" H23A in my '01 Accord I4 5MT. Despite this seeming like a very common, conventional "swap", any previous documentation regarding an h22 swap in a 6th gen accord that I've come across thus far is very lacking. So it looks like I'm (yet again) going to...
  24. Bense

    Hi.

    Hello. I'm Andrew. I pride myself on putting parts in cars that don't belong there. I try to save money on car parts so that I can spend it on better things, like curvy girls. :)
View older results

Latest posts

Random media

HID 3000k,10000k warming up
IMAG0109
DSCN0041
on our way to manchester honda sport.. only honda dealership that sells aftermarket parts for honda in ct..
SDC10024wide
Back
Top