Search results

  1. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    That is unfortunate.
  2. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    Looks like it might be necessary, they sent me a broken one. How do I swap the Coolant gauge only? That part might still work. If I can bring it onto my cluster, and that will do what I need in the end, it could work out.
  3. Mark2001Accord

    6th Gen Accord F23 Vtec Operation

    The specs are from the manual. I am not saying that one valve is held closed. One intake valve opens half way, the other intake valve opens like 80% . Soon as you accelerate , not cruise or idle, the Vtec kicks in and they both lift of the 39.725mm lobe. There are numerous threads suggesting...
  4. Mark2001Accord

    6th Gen Accord F23 Vtec Operation

    The way I understand the system the one intake valve only opens not even half way. It is held shut until you push the gas pedal. Not RPM limited.
  5. Mark2001Accord

    Identifying fuel line thread size 2001 Accord

    Need help identifying thread size on the Fuel line going to the fuel rail. I have 2 sources telling me 2 different thread sizes. Both sound reasonable. I am just starting to replace all those lines underneath. Like M14 x 1.5 or M12 x 1.25 ... or 9/16th NPT...Not sure. Its is hard to trust the...
  6. Mark2001Accord

    Anyone using Android head units?

    Recently while on Ebay I noticed The Pioneer Appradio 3 has come down in price. They can be found for under $100 bucks now. The Appradio 3 connects right to phone apps, and mirrors the cel screen. Run apps like Torque, or Dash command, music / video in phone storage, Cd's, Movie's on DVD...
  7. Mark2001Accord

    6th Gen Accord F23 Vtec Operation

    Not shut , but close. Using the term 'shut' was a poor choice. 2 valves, meaning the intake side. Vtec is only on the intake side on the F23's system. The F23 Vtec crossover point seemed to behave much different than other models. Another forum member chimed in, also suggesting operation down...
  8. Mark2001Accord

    6th Gen Accord F23 Vtec Operation

    Is the Vtec operation of the 6th Gen Accords similar to Integras and preludes? While going through some documents there was some info i might have misunderstood. I always thought the Vtec switched over at 5250 RPM or something similar at certain percentage of throttle and load. The F23 reds at...
  9. Mark2001Accord

    How To: H23A/H22/F20B Temperature Gauge for 2000-2002 models

    They work now. Will replacing the cluster effect the immobilizer? The cluster displays the source mileage from the ECU, not the cluster, correct? I think that the odometer has to do with the immobilizer system and security, perhaps not. I cannot recall. Its been a while.
  10. Mark2001Accord

    Transmission Parts

    Yes, that way the RPMs will not be over 4000 at 60 MPH. That is such a heart breaker, with the Prelude boxes. Nice final drive, close deep ratios, but a low 5th gear. I had to clearance the 5th gear from a P2A8 for my Accords Prelude transmission. The P2A8 5th is no longer produced. Hard to...
  11. Mark2001Accord

    Everything you ever wanted to know about N2O, ITT

    After installing Hondata, all I needed was a $30 nitrous solenoid to get a budget NOS system working. Kind of a hybrid dry shot. The Hondata meters the additional injector fuel and controls the single nitrous solenoid. I am using a 50 hp jet. This is done on both my Hondas. The 50 shot used...
  12. Mark2001Accord

    How To: H23A/H22/F20B Temperature Gauge for 2000-2002 models

    Is it possible then to reuse the existing wire in 00-02 models? Because it is there in the connector?
  13. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    Will changing the clusters effect the anti theft stuff? Does the immobilizer or key functions get disturbed? This is great, I 'm gonna get this one finally. Part ordered off ebay. Local U pull it, turned up empty nothing that specific.
  14. Mark2001Accord

    How To: H23A/H22/F20B Temperature Gauge for 2000-2002 models

    Thank you. The pictures are not loading. It looks like I need the 99 cluster for my 01.
  15. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    Wow I got replies. With solutions. Thank you. I need a 99 cluster? No, I never solved this.
  16. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    This F23 turbo Manifold was supplied by Rev9 from ebay. JDMDepot has them too. They are those cast log types that last forever. Probably not the highest performing but keeps the AC and takes little space.
  17. Mark2001Accord

    FS: FS: seat heater switches & tray

    This is for the 2001? I would try a heated seat install. Is this sold? The seat covers are only held in by hog rings. Should be fun, and this peice will give it a clean look. I wanna be sitting in the hot seat!
  18. Mark2001Accord

    Hondata and the Temp Gauge 2001 Accord

    The factory cluster's temp gauge recieves a replexed coded digital signal generated from the ECM. The factory temp gauge in the cluster will not work with the 6th gen Accords AND Hondata. Hondata does not emulate the signal ..yet. My research led me to Redline Gauges. They retrofit antique...
  19. Mark2001Accord

    Replacing rear brake lines

    The vent and return lines are under there too side by side. Cracks and vent line leaks will cause idle problems and poor mileage.
  20. Mark2001Accord

    2001 LX

    My Accord project started out as a challenge. A number of friends were disappointed with the outcome of their brand header and intake install. Not much gain. So for the same cost or less , I wanted to force my Honda fast. $500 for the header and $200 for the intake was budgeted. So I went to DNA...
  21. Mark2001Accord

    2001 LX

    Here is my 2001 Jackson Racing supercharged Integra GSR. You all might appreciate it. Same deal , Hondata, NOS, water injection, Type R LSD trans with far off 5th from a LS, etc. Video Integra https://drive.google.com/file/d/1SfvNGEgmAh7mkws0qDMQ_lhBXtDO7OVH/view?usp=sharing
  22. Mark2001Accord

    2001 LX

    It lived a rough life. I take car of it now. Was a work car for a family member many years. Dumped on me. After impeccable service ...it got the bonus plan! After I rebuilt the top end I took it to be dyno tuned(2014?). Under break-in conditions , the BCS was set at 1/2 bar. It made about...
  23. Mark2001Accord

    2001 LX

    My 2001 Accord F23 5 speed. Precision turbo, nitrous, water injection, Hondata, etc. 150k miles and still strong. Synchrotech carbon sychro H22 base LSD 5 speed transmission with a P2A8 LX 5th gear set to bring RPMs under 3k on the highways. JTC shifter, and lightweight flywheel. 5 lug...
  24. Mark2001Accord

    Hi

    Thank you.
  25. Mark2001Accord

    Finished h22 swap, need ecu advice

    That footrest is really cool. You make the welds and everything? I put my primary ECU in the glove box. USB port up, for the Hondata.

Latest posts

Random media

IMG 1850
now you cant even tell there was a hole that was fixed!!!!
7549.jpg
Dirty Magnaflow
7529.jpg
Back
Top