Search results

  1. cg4ever

    RR's '99 coupe EX-L

    Where in the process you stucked ? is the bulb on the pcb or inside the switche ?
  2. cg4ever

    Acura TL power window switches lighting

    Hey FNCONE, I just purchased an 2 door CL master switch, should be 01 or 02 model not sure tho. My 6th gen is a 98. What is this kind of module you talking about ? You think i'll need it to make it work with my 98 ? Did you buttons light was lit up accordingly to your park/headlights ? or they...
  3. cg4ever

    RR's '99 coupe EX-L

    Finally purchased an CL master switch. Both driver and passenger window buttons are illuminated. I'm not sure but i even think the window lock button is, i'll see when i get this in hand. I prefer the CL translucent Auto and small dot light passenger window than the RL Auto "glass" type and...
  4. cg4ever

    RR's '99 coupe EX-L

    As i guessed, there should be an extra wire to the Acura harness that indicate the switch when the park or headlights are flipped on or off. From what i noticed the RL and the 6th gen have the same harness connector with 12 small pins in the middle and 8 larger pins by 4 on each sides. Also...
  5. cg4ever

    Acura TL power window switches lighting

    Thanks for your reply Fncone, I saw the RL wider light but for some reason i prefer the small dot light version from the TL switches. It look like the 01-02 Acura's CL has the same 2dr master window switch as our 6th gen so it may be plugnplay but not sure if both switches lit up. I notice...
  6. cg4ever

    RR's '99 coupe EX-L

    Wait, 6th gen 98-02 didn't had any lit up switch so here you're talking about the 01-02 acura button switch right ? So you just replace the whole master switch in a plug'n play fashion and it still lit up and turn off when you flip your park or head lights ? Not sure exactly how it works but...
  7. cg4ever

    RR's '99 coupe EX-L

    is the switch always stay lit up even if your headlights are off ? Because our 6th gen didn't came with a illuminated switch so my guess is that our harness don't have that extra wire that make the switch lit up when turning on the headlights, i'm wrong ?
  8. cg4ever

    Acura TL power window switches lighting

    Hello guys, where i live we don't have the Acura's so any of you have any pictures of how look the original 99-01 TL button switches but lit up ? Also if you have any of the RL from the same years would be cool too. Would be appreciated thanks.
  9. cg4ever

    Bumper rear lip origin ?

    Ok, seems usdm and edm 6th gen accord have different bumpers..
  10. cg4ever

    Bumper rear lip origin ?

    Hello guys, Any idea what rear bumper lip is this below ? I feel it's an oe one but quite not sure about it. Also it seems it feet the '00 bumper and later. Do rear lips in general fit both 98-00 and post '00 bumper or they are different ?
  11. cg4ever

    Richard's '02 V6 Coupe EX-L

    Btw any reason you height up the back of the car ? Just for style and having a raked style or more for practical reason (ie rubbing ) ?
  12. cg4ever

    How low you ride your Koni yellows ?

    Hey gang, So i got a chat with two different Koni representatives and both stated the same things. With the Koni yellows for our 6th gen they recommended me to not use springs lower than 40mm and only using the upper groove if lower springs are used. So i would like to know how low are you...
  13. cg4ever

    HomerJay's 2001 Accord Coupe EX (56K) [UPDATED 9/30/2018!!]

    Still amaze me how those tiny circlip can hold the entire spring load and pressure... Other than that it's a bit difficult to see but it seems that you're using the upper groove on both dampers ? If you don't mind could you tell me how many mm there is between the upper and bottom grooves on...
  14. cg4ever

    Eibach Prokit vs Sportline Springs

    Today i got a Koni representative on the phone and basically what he recommend me with the yellow is to not use lowering springs more than 40mm and especially to NOT use the bottom groove with ANY lowering spring. He told me that the bottom groove is intended to be used with stock springs only...
  15. cg4ever

    Eibach Prokit vs Sportline Springs

    I read that around 2008~2009 K-Sport has made some major adjustement to their products. They indeed could have raise the spring rate of the 6th gen accord for some unknown reasons but still seems a weird decision. I'll try to call them back tomorrow again and get a confirmation about those...
  16. cg4ever

    Eibach Prokit vs Sportline Springs

    Just got an K-sport German representative and he just told me that the spring rates for the Accord 6th gen was 17.8 front and 7.0 rear. I don't know if he did a mistake or something but 17.8kg on front seems a lot to me. Must be very very stiff.
  17. cg4ever

    Eibach Prokit vs Sportline Springs

    Do you remember what front and rear spring rates came with your K-Sport coilovers ?
  18. cg4ever

    Richard's '02 V6 Coupe EX-L

    What are your front and rear spring rate in kg with your teins ? Can you describe how it ride and compare vs stock ? Did you tried any other spring rate setup ?
  19. cg4ever

    Richard's '02 V6 Coupe EX-L

    Very useful information, thanks Richard and keep taking care of her.
  20. cg4ever

    Eibach Prokit vs Sportline Springs

    Hey Redryder, Still have some questions 1- it seems that in those pictures the car sit unevenly because of the ground, the car leaning on the right side and the left side seems more higher compared to the right. Could it be ? 2- Also what was your Prokit reference part number ? And what was...
  21. cg4ever

    Richard's '02 V6 Coupe EX-L

    Hello Richard what is your drop in mm at front and rear ?
  22. cg4ever

    Eibach Prokit vs Sportline Springs

    Thanks for the input RedRyder, when you received the Koni dampers do it says in the notice what is the maximum lowering the front damper can take ?
  23. cg4ever

    Need some advice on rims and wheels.

    Ok found the car thread and asked there as well.
  24. cg4ever

    phi1542's 1999 Coupe EX-L V6 [Retired]

    With those wheels specs 17x8 ET30 in front and ET25 in rear i'm very surprised how you got your wheels almost perfectly aligned with your fenders and not having them sticking out. I've seen many other wheels fitments on other coupe users with less offset than yours and their wheels seemed to...
  25. cg4ever

    Need some advice on rims and wheels.

    So in those pictures the car has 17x8 +30 all round ? There is any camber kit or roll fender job front and rear ? There is more pictures of this car setup ?

Latest posts

Random media

after drop....car looks sooo shiny!!!
image
008
6gaSig copy
IMAG0682
Back
Top