Search results

  1. 7ender

    FS: 10mm hubcentric spacers (4x114 and 5x114)

    bump, all that's left is the hubcentric spacers. edited price
  2. 7ender

    FS: 10mm hubcentric spacers (4x114 and 5x114)

    In December of 2011 the wheels were stolen off my car, and I never got around to rebuilding. After having my wheels taken car was put back to stock, so these parts have been sitting around for over a year and a half now. SOLD: First are some NEX coilovers. They are dirty and have their share...
  3. 7ender

    STOLEN in San Diego- Wheels and Roof Rack

    Been looking everyday on cl, no luck unfortunately. Thanks for the comments everyone.
  4. 7ender

    STOLEN in San Diego- Wheels and Roof Rack

    Thanks guys, really means alot to me. Now that i've got half the net looking for them, I suppose my chances are a little better ;) I know I should have had wheels locks, but at this point it's too late for that. Didn't think I needed them for XXR's, but obviously I thought wrong...next time...
  5. 7ender

    STOLEN in San Diego- Wheels and Roof Rack

    Just got back to my car today at 12:30pm on 12/6/11 to find my car like this :(. Thule roof rack and wheels were stolen. Car was parked on La Jolla Village Dr. in San Diego since 7pm. Went to school (UCSD) overnight to study for finals and came back to find it on blocks. Super disappointed...
  6. 7ender

    Clutch Engagement Low

    Just turn the nut behind the clutch pedal. Super easy adjustment, i do it all the time to keep my cluth engaging right where i like it :)
  7. 7ender

    7ender's 02 Accord Sedan [new pics 5/23]

    couple pics from HF8 added
  8. 7ender

    Jephu's 2002 Accord Sedan SE

    Re: Jephu's 2002 Accord Sedan SE (updated Jan 22, 2011) Hahaha, that's where I was going too. There's a reason I didn't drive my car! :p
  9. 7ender

    Jephu's 2002 Accord Sedan SE

    Re: Jephu's 2002 Accord Sedan SE (updated Jan 22, 2011) Jephu! I just saw you on nobel near ucsd. I was in my gfs mini cooper lol but your car looks good! I think im guna have to get a ww kit now.
  10. 7ender

    how to adjust clutch pedal?

    Went ahead and did this today- literally took 5 minutes and now my clutch is 5x nicer.
  11. 7ender

    how to adjust clutch pedal?

    I'd be interested in this too, if you ever found an answer. I remember seeing a short guide on how to do it before, but I can't seem to find it.
  12. 7ender

    DIY Bumper Tab Relocation (56k better to go a friend's house.)

    Because some people don't have angle grinders, and you can cut the plastic with something smaller ie a dremel. And imo, it's much cleaner and doesn't take as long to do...so that's why it would make sense not to cut it.
  13. 7ender

    DIY Bumper Tab Relocation (56k better to go a friend's house.)

    just an fyi, you dont' actually have to cut the metal part out. If you're familiar with the technique for rolling fenders, you can actually bend it up flat against the fender and it is moved out of the way. Then screw relocation goes as normal. The plastic however, must be cut.
  14. 7ender

    FS: Gloss Black Roof Vinyl

    No, none of them are cut to fit. The way you install it basically requires that you lay it on, then trim it to fit perfectly into the seals along the roof of the car. If it were pre cut to fit, it would never fit perfectly cause the vinyl stretches, shifts, etc during install. PM me and i'll...
  15. 7ender

    FS: Gloss Black Roof Vinyl

    It'll fit either one :)
  16. 7ender

    FS: Gloss Black Roof Vinyl

    Still for sale. Currently in LA and will be here til sunday if any of the los angeles crowd is interested.
  17. 7ender

    FS: Gloss Black Roof Vinyl

    I bought this for my car but never ended up using it. It's the vinyl used to black out a car's roof (or whatever, but this one is sized to fit the roof of our cars). Here's a picture for reference of what it looks like (this is the same vinyl that i'm selling): It is very high quality...
  18. 7ender

    18x10 with 25 offset on all 4 corners? possible?

    They stick out a little past flush. In those pics it looks like quite a bit of poke, but since then iv'e gone lower (increasing the camber and pulling the rims in a little more...).
  19. 7ender

    18x10 with 25 offset on all 4 corners? possible?

    I would say this is definitely possible. I'm running 18x9.5 +25 all around now, and I can imagine fitting bigger. Just know that you will need alot of work to get them to fit- I have rolled/pulled fenders and am running -4* camber in the rear and -2.75* in the front. And know that you won't...
  20. 7ender

    Running 9" wheels question????

    Like everyone said, a 215/45 over a 9 will be a pretty decent stretch, and if you have wheel gap it's going to be ugly. To answer your question, yes you'll need to roll your fenders considering the +20 offset. But before you even get to the rolling part, you'll first need to relocate the rear...
  21. 7ender

    DIY cold air intake, CAI (PICS & Video!)

    bump from the deaddd Anyways, iv'e been running this mod for about a year now, but i'm thinking about getting a real intake (or maybe an ebay one...worried about carb sticker issue). My question- for those who have first hand experience with "real" CAI's or SRI's; how does the sound compare...
  22. 7ender

    Alignment after lowering- how important?

    Had an alignment done today /thread
  23. 7ender

    7ender's 02 Accord Sedan [new pics 5/23]

    Re: 7ender's Hellaflush 02 Accord Sedan It's 35 with a 10mm spaced out rear :)
  24. 7ender

    Alignment after lowering- how important?

    Well the tires I have on only costed me around 150$, and since the cheapest alignement I can get is 100$, I didn't really find it worth it to try and save the tread on my tires that cost almost the same as the alignment in the first place. And no, I cant' go to the cheaper alignment places...
Back
Top