Search results

  1. B

    H22 swap is DONE!!!

    Yeah I can help when its time for you to do the swap. Stock H22a and yes I have traction issues. I can't get traction in first at about 4k+ rpm if the tires aren't a little warm first. Alothough I did just buy new 205/40/17 wheels and tires so that should solve that problem. I sold my factory...
  2. B

    H22 swap is DONE!!!

    Ok pics will be coming eventually... I do work full time, have a family, go to engineering school, just moved, and just started my new job. Oh and I work another job on Sunday too. I think the next big upgrade would be with an LSD h22 trans as I have traction issues, although I just did the auto...
  3. B

    H22 swap is DONE!!!

    OK so I finally got my H22 swap done and tuned. Totally worth it, much more fun to drive and 1st gear is amazing with vtec and an aluminum flywheel.
  4. B

    Doing H22 swap tomorrow need some help

    I have no idea. I don't know if the engine was rebuilt and hence the 250psi of compression in each cylinder or if they just put in different cams. The engine isn't clean enough for a rebuild in my opinion. But the engine did come with and aluminum flywheel so it wouldn't surprise me if bigger...
  5. B

    Doing H22 swap tomorrow need some help

    Ok well I figured it out myself, rocker arm shafts weren't aligned. Not sure if there is something that is supposed to hold them still but I guess I will figure that out as well.
  6. B

    Doing H22 swap tomorrow need some help

    So if anyone is actually reading this I was looking at http://www.honda-tech.com/showthread.php?t=830163 and wondering about the air test. I already tried this but without removing the valve cover and plugging the 5th gen cam cap breather hole and it seamed like the air was bleeding right into...
  7. B

    Doing H22 swap tomorrow need some help

    Ok so I am going to have to figure out why the vtec wire has power at idle, and only 2.5 volts with the engine off but ignition on. The vtec wire hasn't even been cut, my car came with vtec so I didn't need to. I am also not getting any check engine lights and the engine will rev to 7800rpm...
  8. B

    Doing H22 swap tomorrow need some help

    OK I personally checked the vtec wire and it has power all the time. Seams odd, shouldn't it only have power above 5k rpm? I tried both my obd1 and obd2b computer and even verified the pinout and the solenoid has power all of the time seams odd.
  9. B

    Doing H22 swap tomorrow need some help

    I haven't personally checked it, but the shop did and said that there wasn't. The left my vafc in so I can reduce fuel 19% and use my factor accord ecu for emissions but disconnected the vtec wires of the vafc and reconnected the factoryt vtec wires to the ecu. They tested it and said that now...
  10. B

    Doing H22 swap tomorrow need some help

    Ok so I got the car to the dyno and they said that the vtec wasn't engaging. They said that they tried engaging it by applying 12 volts to the solenoid and that didn't work. They did test the vtec plug for power and they got power at the right rpm. the also check for oil in the front port and...
  11. B

    Hello Everyone! Need A little Help

    iacv 2 wire is compatible with 3 wire harness. One of the wires just doesn't get used, I think its a ground. The wire colors should actually be the same for two of them and the third just don't use. Which engine are you using, the stock f23? If so then don't worry about the IACV since you won't...
  12. B

    Another leaking problem

    Mine doesn't leak :)
  13. B

    i need help with my 98 with ulev

    Couldn't he just put the regular O2 sensor in there and take care of the problem? Unless the guy also swapped the wiring harness the wide band won't even plug into the regular harness. Seems a lot simpler then getting the ulev computer and matching keys are having the dealer program new keys.
  14. B

    Will a 94-97 accord exhaust fit my 98? Need to know asap

    OK so I found a lead on an exhaust for a 94-97 accord from greddy. What is the difference between a 98 accord exhaust and a 94-97 exhaust?
  15. B

    Doing H22 swap tomorrow need some help

    OK so the car is going on the dyno Monday at 9:00AM! I am excited!! I bought a P28 ECU pre-chipped and ready to tune with crome for $250. Unfortunately they said they couldn't tune my P13. I should have bought the P28 offered earlier in this post and had it chipped for $100 but I thought I...
  16. B

    Doing H22 swap tomorrow need some help

    I will let you know as I will ask. OK so heres the deal. I installed the 310cc injectors and the obd1 ecu and it idled ok at first and then started idle hunting as soon as I hit the throttle unless I shut it down and restarted and the cycle would repeat. Also it will allow me to hit 7800 rpm but...
  17. B

    passenger CV joint broken

    Mine was 36mm also.
  18. B

    i need help with my 98 with ulev

    The biggest difference between the stock ULEV and the stock vtech is the exhaust manifold or so I have been told. Now the oxygen sensor is also different on the ULEV but just use your stock vtech one and all will be fine. Make sure he plugged the speedo in, its down low under the intake tube on...
  19. B

    Doing H22 swap tomorrow need some help

    Oh sorry I thought you were talking about the adapters. Ok so here in Oregon for emissions, aka DEQ, they just plug into your OBD2 port and check for readiness codes. As long as the readiness codes are there and the car isn't smoking, no check engine light, and isn't excessively loud you pass...
  20. B

    Doing H22 swap tomorrow need some help

    Its an answer to your question about obd2.
  21. B

    Doing H22 swap tomorrow need some help

    The injector plug connections on my new 310 cc injectors are obd1 style, according to the shop I bought them at. My 98 accord harness has obd2 style injector plugs. The adapters I bought plug into the new injectors and my 98 accord harness. The difference in plug is that the older style...
  22. B

    Doing H22 swap tomorrow need some help

    Well thats great news because I just bought 310cc high impedance injectors, about 30 min ago. Along with the OBD1 to OBD2 adapters so I don't have to splice my harness. I actually bought them at VIP Performance, who offered to chip my ecu with chrome and put a base tune on it for $100 and dyno...
  23. B

    Doing H22 swap tomorrow need some help

    Ok what if I just bought some 310cc high impedance injectors from horsepower freaks? They are 20 minutes away so its not too hard to get them. Would that make it pretty much a plug and play swap so I wouldn't need to use the vafc just to get the car to run and could leave it a 0% adjustment for...
  24. B

    Doing H22 swap tomorrow need some help

    Not that I doubt you, because I don't but I have read that the obd1 h22 injectors are 345cc in one place, 330, in another, and you say they are 310cc? Does anyone have solid numbers on both the f23a1 stock injectors and the stock obd1 h22a injectors. I need it for a baseline setting for my VAFC...

Latest posts

Back
Top