Search results

  1. M

    Slave cylindre removal question

    Ok so I finished installing the new CMC, all that is left is to connect the hard line and the rubber line that comes from the reservoir. My only problem: when i connect the hard line to the CMC, and then secure it with the pin (as you can see in the picture), the hardline tends to pop out...
  2. M

    Slave cylindre removal question

    Ok so I inspected the floor mats and they are clean. There are no leaks whatsoever. I inspected the clutch line that goes from the slave to the master cyclindre and from the master to the reservoir, it all seems fine. I am guessing the problem is the CMC. Is there any other way to diagnose it? I...
  3. M

    Slave cylindre removal question

    Top right from looking under the hood. Thanks for the replies, I'll get back to you tomorrow.
  4. M

    Slave cylindre removal question

    Bringing this thread back to life. I was driving to the gym a couple of hours ago and my clutch stop working again. When I press the cluctch, I have pressure for the first couple inches and then I hear a ''psshhhhh'' (like the sound of air escaping) and my pedal looses all pressure and...
  5. M

    Ronez's 00 Accord Coupe **Updated [24/08/2010]**

    Re: Ronez's 00 Accord Coupe Montreal!
  6. M

    Slave cylindre removal question

    The new slave cylinder is now installed and my car is fixed. Rep to Badger and F23 who were of great help.
  7. M

    Slave cylindre removal question

    ^ Nevermind, it was super easy...
  8. M

    Slave cylindre removal question

    I'm almost done removing my slave. The only thing still holding it in place is the roll pin. I didn't get a new roll pin with my new slave though, so I most not break it while trying to remove it. Does anyone have any idea how to remove it not breaking it?
  9. M

    Slave cylindre removal question

    I put the bolt there because my valve was striped and was leaking. I put a 12mm bolt there while I'm waiting to recieve my new slave cyl. I'm gonna try to bleed it tomorrow. Hopefully, the bolt will retain the brake fluid and make my car driveable. When my salvce went out, I had to drive on...
  10. M

    Slave cylindre removal question

    Thanks for the help guys, I will try again tomorrow. Will removing the roll pin release the hard line?
  11. M

    Slave cylindre removal question

    The nut is circular, here is a closeup.
  12. M

    Slave cylindre removal question

    But the nut is round. Should I try vice grips? Just to make sure, I'm trying to un bolt the hardline, not the bleeder valve.
  13. M

    Slave cylindre removal question

    My slave gave up on me yesterday. At first i was afraid it was the clutch, but I quickly realized I was out of clutch fluid, which made me trace the problem back to my slave cylindre. Question: I am currently trying to replace my slave. I removed the two 12mm bolt that where holding it. Now...
  14. M

    possibly looking for a new car

    TC is useless IMO. ABS creates an overinflated sense of security and dosen't teach people to break the right way... If you really have to get rid of the accord, I'd say go with a 07 or 08' Lexus is250 awd, can't beat the build quality.
  15. M

    ledautomotive.com?

    Great if you don't mind paying a little more. As The hunter said, their solderless kits are really easy to install. Great customer service to.
  16. M

    How NOT to mod a 6th gen....

    Wrong link?
  17. M

    Alarm keeps going off.

    I have the problem again! Now I'm looking to unhook the horn from the control module, but I just really can't find it. After some search I found that this is what it is supposed to look like. I removed the console lower cover (where the ashtray would be) and the driver's dashboard lower...
  18. M

    Replacing door pannel, alarm system

    I need the whole door. So the alarm will still work even if I dont have the security light? There's no extra connector for the alarm?
  19. M

    Replacing door pannel, alarm system

    I have a 5 speed I4 coupe and have to replace my drivers door. Will any year do? Also, I have a stock alarm system and I'm wondering if I can buy a door without one. I dont mind losing my alarm, I just want everything to fit and connect properly.
  20. M

    Red6thgen's 1999 accord coupe Lx with vid (56k)

    Re: Red6thgen's 1999 accord coupe Lx (56k) Nice Is that a stock 99 grill painted red?
  21. M

    Alarm keeps going off.

    ^lol, it's a bit hard to picture. What hapenned is that i sled on a patch of ice while turning. My wheels locked and i sled towards the stop sign. there was a big metal pin sticking out of the sign which sliced my door. It's not that bad though, I wanted to change the door this summer because...
  22. M

    Alarm keeps going off.

    This is the stock alarm, it goes off when a door is unlocked manually without the use of the remote.
  23. M

    Alarm keeps going off.

    thanks for the suggestions, I'll try them tomorrow. Also I should add that I hit a stop sign a couple weeks ago, slicing my door panel. I thought some water could have got in the door and cause a short, but I checked my fuses and they are fine.
  24. M

    Alarm keeps going off.

    My stock security system keeps going off at random time during the day/night. I tried removing the battery from my door lock/trunk remote but the alarms keeps going off. Is there a fuse I can pull out or any other fix I can attempt? Right now I'm leaving my doors unlocked so I have to try and...
Back
Top