Search results

  1. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    UPDATE!!!!!p1607 code is a ecu code. Definitely replace ECU!. The other problem was that I was losing transmission fluid because a cooling line was loose. Tightened and refilled transmission car runs great. Thanks for all your help. Hopefully this forum can help solve someone else’s problem
  2. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    And also the thunderbird needed a flex plate which I am planning on doing soon if this accord keeps acting up
  3. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    CDSDONTBURN, to answer your question yes the car cranks and starts and runs, but after I swapped the ECU, by passing the immobilizer, when I accelerate in D4 or D3, it moves forward extremely slow, in D2 and D1, it takes off normal, but Aroind 30 mph, the car bucks and hiccups. And the New ECU...
  4. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    Still having P1607 Code and poor acceleration even with old ECU!!! Can anyone whose familiar with this code answer???
  5. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    selttijcmanit what do you mean?
  6. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    No. I took the immobilizer chip out the donor ECU. Green key flashes but it cranks and Starts.
  7. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    Update::!!! the scrap yard ECU runs better but take off is slow. Still only one P1607 code. Any help would be appreciated on what causing my slow take off. ALSO:The car had a jumper wire leading from the fuel pump when I purchased it about a year ago. It sat up until this past March when I was...
  8. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    Ok swapped the ECU initially installing one from U-Pull it, it erased the code P1607 but wouldn’t start the Car. So all intermittent codes were not showing up on my OBD2 scanner, changed the immobilizer chip out the donor ECU car cranks but still has the P1607 code.
  9. 9

    Idle Problems

    Replace your EGR valve and clean the port holes going through it in the intake manifold. I also seen where the 2nd clutch pressure switch could cause sporadic idle issues.
  10. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    I might have to replace the ECU with a used one and get it programmed at HONDA/Acura of Memphis. I’ll keep you all updated
  11. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    Yes. It started with just that one MAP code then after I drove to Dallas Texas from Memphis it started these symptoms of not starting and these trouble Codes. I called Honda today and the service mechanic said that it could be the ECU or another electrical circuitry malfunction and their...
  12. 9

    1998 Accord P1607 Alongside other sensor high voltage codes

    Checked for Error Codes and this is what I got: P0108 Manifold Absolute Pressure sensor circuit high voltage P0113 Intake Air Temperature (IAT) sensor circuit high voltage P0118 Engine Coolant Temperature (ECT)sensor circuit high voltage P0123 Throttle Position Sensor (TPS) circuit high...

Latest posts

Random media

2012 05 06 17.31.54
Side 3/1/09
Green trim done
17" Stern ST-4 Wheels
Before drop
Back
Top