Search results

  1. INK DEMON

    Car sputters then dies intermittently

    2002 4 cylinder MT. The car runs fine most of the time and idle is where it needs to be most of the time as well. At random moments the car starts to sputter and then dies. I'm able to start the car right away and it continues to sputter then die again. It seems to accelerate fine, and after I...
  2. INK DEMON

    DIY Clutch Replacement (4 cylinder)

    It was time to do the clutch again so I decided to do a write up. Feel free to let me know if anything is missing. Things you'll need: - Wrenches - Ratchets and sockets (1/4, 3/8 and 1/2" drives are all useful) - Breaker bar(s) - Torque Wrenches - Jack - Jack Stands - Crankshaft pulley tool -...
  3. INK DEMON

    Fuel Pressure Test fitting size?

    I'm looking at doing a fuel pressure test on a 4 cylinder. I still need to buy the pressure tester and after shopping around for a while I can't seem to find any info on the size adapter I need with the kit. Does anybody know the size/thread pitch of that tube that the pulsation dampener screws...
  4. INK DEMON

    Suggestions for amp mounting locations on 02 Accord?

    My accord has the cup holder in the rear with that little door that leads to the trunk. I am looking for ideas on where and how to mount my amps I'm going to be installing. -I don't want to lose my spare so that is out of the question. -I don't want to cover the door leading to the trunk...
  5. INK DEMON

    Lighting switch wire for new deck?

    I am planning on installing a Pioneer AVH-P2300DVD deck in my 02 EX-L tomorrow and I'm looking in the Pioneer manual and it says to connect the Orange/White wire to the lighting switch terminal... I looked up the wiring diagram for my Accord but I am confused about which wire to use... The...
  6. INK DEMON

    FS: **edited by B/N***

    *****edited by B/N**** Please read the rules
  7. INK DEMON

    Very bad vibrations between 50-60 mph under load

    I'm having an issue with my accord and was hoping to be able to get some insight on the matter. Maybe a few suggestions on what I should check. So here's the scenerio... Whenever I'm driving, and I start hitting 50-60 mph, the car starts to wobble extremely bad. It only does it while I'm...
  8. INK DEMON

    Rear balance shaft alignment question (problem)

    Hi everyone. I am having a little issue with the alignment of the rear balance shaft after doing the timing belt replacement. I replaced the timing belt this weekend and the cam/crankshaft belt is correct. But when I went to install the balancer belt, I couldn't remember where the rear balancer...
  9. INK DEMON

    floorboard lump

    So here is my problem... I have an 02 sedan and there is a lump on the driver's side floorboard that runs from behind the driver's seat all the way to the the driver's side passenger floorboard. The lump is facing upward. On the underside of the chassis I can see where it got bent. It seems to...
  10. INK DEMON

    F23 bolt-ons and California emissions

    I'm curious to hear from someone who lives here in Cali and has the F23A4... I was just wondering if the basic bolt-ons (intake, header, exhaust) would affect the emissions of this car enough to make it fail Cali smog. I'm asking for input from Cali heads being that our engine is a bit different...
  11. INK DEMON

    I'm new here

    What's up everyone. I'm new here (I registered a few days ago), I've been looking through the threads and have already found lots of good info. I just wanted to take the time to introduce myself before I start posting stuff on here. I live in the San Diego area, I have a 2002 EX sedan (manual)...
Back
Top