Search results

  1. M

    FS: Fs: Ported f23 manifold / cam gears / MSD SCI

    I had this F23 manifold ported by Polarbeartuning. They fully ported the runners and port matched the throttle body to the maximum size possible, can't remember if its 60 or 62 mm, but either way plenty. If you're running an F23 you'll be better off with this size than going too big anyway...
  2. M

    FS: Kaizenspeed Balance Shaft Eliminator Kit! 6th GEN ACCORD $95 !!

    Never got to use this one either... Price reduction!! New in box comes with instructions $95 shipped USA!! email @ [email protected] for fast response
  3. M

    FS: Pspec shifter new in box! 6th gen accord

    Never got to use it so here goes...... New in box, comes with freebie (whether you want it or not) B&M shifter $250 shipped in USA ~ PAYPAL ~ FIRM YOU MUST CONTACT ME VIA EMAIL @ [email protected]
  4. M

    FS: Synchrotech M2A4 TRANS, F23 PISTONS, BISI F23 CAM, RDX INJECTORS

    All on ebay....... injectors sold http://www.ebay.com/itm/230753131090?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_499wt_1416 http://www.ebay.com/itm/230753150762?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_499wt_1416...
  5. M

    remove

    please remove
  6. M

    FS: Skunk 2 f22 / f23 cam gear red new! 2 available

    TWO SKUNK 2 F22 / F23 CAM GEARS FOR SALE BOTH RED. One box has been opened to take the pic of the gear and the other is still sealed. I do not need these anymore. I will ship them for $50 FIRM each, anywhere in the US. I accept paypal only unless you're local to Rockford IL. For fastest...
  7. M

    Milling H22A4 pistons for F23 ?

    What if I were to mill some H22A4 pistons down 1mm to the proper compression height for an f23? I'm just not sure I want / need to use forged pistons with my build because of the cold winter 0 degree driving / low power goals ~ 200 hp. K series pistons reversed and fly cut won't give me as good...
  8. M

    FS: Crower MAXI-LITE F23 RODS NEW IN BOX

    A set of new Crower MAXI-LITE F23 RODS NEW UNOPENED STILL IN PLASTIC AND BOXED. 464 grams and strong as can be these are perfect for your F23 or G23 builds. Contact me at [email protected] for faster response. $650 shipped USA
  9. M

    FS: F23 Wiseco FLAT TOP PISTONS 86.5 COATED $350 SHIPPED!

    Unused set of Wiseco 86.5 pistons unused with tapered all-motor wrist pins and rings, coated skirts +1 valve reliefs! $350 SHIPPED! PRICED TO SELL. Check my other threads for pictures. Contact me @ [email protected] for faster response. THANK YOU! Mike
  10. M

    FS: Bisimoto LVL 2.5+ F23 camshaft NEW

    Would trade for a LVL 2 F23 camshaft or sell for $300 shipped. I realized this cam isn't ideal for my setup. I'm building a daily driver, and I have cut valve guides (not high lift friendly) and don't want to rev the hell out of this engine. I'll probably regret not trying it out first but I...
  11. M

    F23 header modification DONE ~ !PICS!

    We all know that there isn't a decent header available for the F23. I was planning on dropping $1K plus on a custom job until I stumbled on this.... http://stainlessheaders.com/headerrepairmod After consulting with Chris Stepp, I am shipping him a Kiddracing H22 header and an F23 flange...
  12. M

    V6 Brake swap HUGE THUMBS UP

    THere's plenty of info on swapping V6/ITR and Legend calipers but I just wanted to say after doing the swap on my car I can't believe how much stopping power I have! I got 4 Brembo blanks from Tirerack (OEM rear and 95 VTEC Prelude fronts) and some Akebono street pads and its quiet smooth and...
  13. M

    Blacktrax IM on F23 head?

    So H23 IM on F23 head has been done with the transition plate. I picked up a Blacktrax H23 with two spacers in a trade and I'm wondering how it might work for my application. I know the Blacktrax manifolds don't dyno so well (+2-3 hp) with H22's, at least from what I've read, but I'm curious if...
  14. M

    F23 journals and bearing width

    Ok, so we're aware smaller rod journals yeild a mechanical advantage and possibly free up a few hp, the downside being a reduction in strength. Most Honda's run relatively smaller journals and the typical journal is 1.888 I find it a bit strange that one of the least performance oriented...
  15. M

    Ati damper for f23 ???

    ATI's tech guys are useless for me right now. Their site states the following..... "The ATI H-Series Super Damper comes with laser-etched timing marks and is a direct replacement for the stock OEM unit. The Damper features a single serpentine belt drive on the outershell to utilize the...
  16. M

    Block guard for F23??

    Who makes one that will fit, I realize nobody markets one as an F23 block guard. Think the F22 or H22 would fit?? Thanks
  17. M

    Custom F23 Header Q's

    If having a custom header made for my F23, should I..... Send out an ebay header to use as a reference for clearances? OOOORRRRR Should I send them an F23 flange and have them build their typical H22 Tri-y but fit to the F23 flange? Will an H22 aftermarket...
  18. M

    I need an f23 exhaust flange

    to send to Sixsigmaracing so they can make my header! where the hell do I get one. Should I just hack one off an Ebay F23 header I have? I want to finish this build so please help!
  19. M

    Valve Deshrouding question.....

    My head has +1 valves and some serious deshrouding. The combustion chambers are no longer perfectly round. This shouldn't be a problem from why my head porter has told me, but I wanted to run it by you guys as well. The piston face, though +.5mm, does not cover these deshrouded areas, but...
  20. M

    Bisi Level 2.5+ cam

    My BISI Level 2.5+ F23 cam specs.......... *based on rocker ratio of 1.65* (F23's apparently vary from 1.55-1.65) Intake Exhaust Valve Lash stock stock Lift (valve) 0.486" 0.423" Adv. Duration 284 253 Duration @ 254 224 0 050" Lobe Center 110 N/A Intake Before...
  21. M

    F23 NA BUILD 200whp or bust.......

    Hey guys. 6thgen newb here, my build is well under way and should be finished up in the next couple months. The build is highlighted by some killer headwork, forged internals and bisi cam. Just waiting on the cam and pistons. Head, transmission (m2a4 mfactory lsd), and rods (crower maxi...

Latest posts

Random media

bikeracksig
mmMMm
IMAG0125
IMG 0927
almost pulled the bumper off.... #lowrideproblems
Back
Top