Search results

  1. SSMNVCG3

    Caliper Brackets

    Yeah that's for the front if you're using the rl calipers
  2. SSMNVCG3

    Top speed

    I got mine to 133 on my f23 5spd years ago when I first got my car, it took forever but it did get there. As others have said its not advised but it is your choice.
  3. SSMNVCG3

    Caliper Brackets

    I have the fat four brackets in my garage that i can get measurements if needed but a member sent me this a couple years ago so this should also be correct since they look identical.
  4. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    I liked my old ones but they were the prototype square lens so they weren't as refined and needed a little bit of work. I also didn't like them so much once I did the boser hood.
  5. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    I bought the brackets brand new from fat four customs, that set me back another 150. Right now I have the dual piston Acura legend calipers with v6 accord rotors.
  6. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    I picked them up for 165 shipped
  7. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    I already made my next bad financial decision too lol these came in the mail today
  8. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    oem headlights, morimoto mini d2s with e46 shrouds, 35w 6,500k bulbs I also switched to the round lens now instead of the square lens that my old set had.
  9. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 5/30/16) updated with pics of new retrofit
  10. SSMNVCG3

    Newbie checking in lol

    The king of carbon has arrived :worthy:
  11. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) Yeah I had to cut the oem fog light holes much bigger and figure out my own way to mount them since you have to cut out the majority of the oem mounting points in order for them to fit. When you buy the fogs you also don't get any wiring so you have to...
  12. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) I found it on eBay a couple years ago for 60 bucks. Comes with 3m tape pre installed on it.
  13. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) Thanks guys. I won't have the square projectors much longer but yeah they are morimoto's. I'm currently working on a new d2s setup and should hopefully have it done within a month or so, the only thing really keeping me from finishing it is I can't find a...
  14. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) My friend did most of the work on the hood and fenders. They were oem fenders that we also modified. For the fenders we just copied a set of track life fender cut outs I have for my hatch as best as we could.
  15. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) The hood is from a coupe. My car was is some sort of accident before I owned it and the hood has never lined up properly. I've tried 4 different hoods and they all fit the same. I chose that color due to the fact that it can look like several different...
  16. SSMNVCG3

    Nick's CG3 (UPDATE 5/30/16)

    Re: Nick's '01 CG3 (BIG UPDATE 3/4/16) Big update finally got my car painted and did some new mods
  17. SSMNVCG3

    01/02 coupe oem fog lights what are they worth?

    Do you have pictures of the broken one?
  18. SSMNVCG3

    Only one windshield nozzle squirts

    Sorry for bumping an old thread but I'm having the same issue after installing brand new oem nozzles and new lines. Driver side works perfect but the passenger side just lets out a couple drops. Anyone have an idea what could be wrong?
  19. SSMNVCG3

    A1 head on a4 block?

    Gaskets are the same. Thanks for the replys. Picked up the motor from my friend last night.
  20. SSMNVCG3

    A1 head on a4 block?

    I have an f23a1 in my car and it's not doing so hot. Can I put the a1 head on an a4 block without issue? My friend has a ulev for sale for 60 bucks since the head gasket is going out. I'm just looking to rebuild the bottom end of the a4 and my current head or another one if that's possible...
  21. SSMNVCG3

    New project '96 civic hatchback

    Just picked up a cargo cover for 10 bucks with some weird **** on it and took about 15 minutes of careful work with a razor blade and a little goo gone and you can't even tell it had anything on it before.
  22. SSMNVCG3

    New project '96 civic hatchback

    Re: New project So an update on the hatch, tore the motor out since the main seal went and it just poured oil out when it was on and sold it to a friend. Sold most of the no name parts that the car had and also traded the rotas and 150 for a set of 16x7 5Zigen fn01r-c all in mint condition...
  23. SSMNVCG3

    New project '96 civic hatchback

    Re: New project I have a friend that has all the evap parts and he's selling me that for 10 bucks so that part is easy. Just need to borrow a code scanner to see if there is anything else wrong.
  24. SSMNVCG3

    New project '96 civic hatchback

    Re: New project Once you get it going it runs great, feels like a really healthy motor except for when you come to a stop. And it looks like a seal might be out since it leaks a lot of oil but thats an easy fix. It does have a cel but im not sure what its for yet, i know the evap system for...
  25. SSMNVCG3

    New project '96 civic hatchback

    Re: New project pictures added, drove the car today and it runs and pulls great, just idles like **** and dies when you come to a stop.

Latest posts

Random media

The primer is still wet in this picture
image (5)
i missed my cb7 so much, but i was glad i took the same pics, feels like the accord is growing with me haha
Cut out on edge of shroud is no big w/ a lil time and with patience. The fit can be made well enough so shroud and core fit with on another.
image
Back
Top