Engine / Performance
- OBX SP Muffler (09/30/11 update)
- 2.5'' pipe from cat back
- DIY oem cold air
- New OEM spark plugs
- New OEM spark plug wires
- DIY Ground Kit (08/06/11 update)
- Brembo Blanks (01/05/12 update)
Suspension
- Function&Form Type 1 coilovers (11/14/11 update)
Interior
- Kicker ZX1000.1 Amp w/ two 10" Kicker CVT subwoofers (09/22/11 update | Removed 12/18/11)
- LED Interior.
- repainted center console
- pa speaker hooked to a switch inside FS
- Jensen double-din touch screen radio
- Wheelskins Black Leather Steering Wheel Cover (Removed 11/23/11)
- Pilot Motorsports Pedals
- OEM Honda Accord Floor Mats (11/21/11 update)
Cosmetic
- Morimoto Mini H1 Retrofit with 4300k Morimoto H1 bulbs from TRS (07/28/11 update) Re-done with DIY blackhoused DEPO headlights, & black cutoff shield. (08/10/11 update)
- Volt hid ballasts with harness
- 31 or 34% tint, i can't remember. darkest you can go here where i live.
- Window Visors (09/01/11 update)
- Paintmatched Side Skirts and Door Moldings (10/18/11 update)
- Mugen polyurethane front lip (12/21/11 update)
- Datum1 Tow Hook (01/05/12 update)
- Simply Clean License Plate Frame (01/05/12 update)
- 0102 Coupe Front Bumper (01/05/12 update)
(02/14/12 update)
Remember when I raised my car that 1/2"? Well I lowered it back down.
(01/11/12 update)
Dropped her another 1/2". (12/14/11 update)
New Interior. (11/21/11 update)
Low. (11/14/11 update)
Paintmatched Sides (10/18/11 update)
Retrofit Re-Do
Morimoto Mini H1 Retrofit
LED Floorshifter Project.
I have to give "Roger" from the acuralegend.org forums credit for this idea.
I added two strips of white computer paper to evenly distribute the light better, as well as spent a little time backing off the leds, as they were too close.
Result? perfection. at least in my opinion anyways.
RE-DO!!!
I had to remake the PRND321 piece b/c i tried to use the method of removing the paint behind it with nail polish remover, yeahhh that doesn't work so well. Well actually it works TOO well as it removed ALL of the paint surrounding the letters. haha so i made another piece and imo it looks better than factory.
I repainted the shift indicator piece, and the center console around it as you can tell in this pic. Looks a lot better imo.
DIY Ground Kit
LEDs
Trunk Light
Last edited: