99CcordMTF23's H22-Swap thread! Update, 10/26/12, pics pg6! RUNNING!

[gold4door02]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

I always wanted to do this swap. . .Looking forward to seeing and hearing about the final product!

 

[Brad2274]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

this swap has been moving quick, that engine is MINT! id rather have it in my car but id be fine with it mounted in my living room with a piece of glass on top

 

[99CcordMTF23]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

I actually wanted to use it as our coffee table, since we have a big round glass one. bahah, And I thought it was gonna take forever, but it only took me a few hours (total) to get my lazy *** to tear it apart, and stab it in.

H22's For Everyone!

 

[9450erick]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

What mounts are u using? i thought u needed the innovative mounts to swap a h22 into the accord? lookin good btw! what are u doin with the old f23?

 

[99CcordMTF23]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

Using all accord mounts and stock H22 Drivers mount with one both through the Accords metal bar thing... (temporary, but the engine is in)

And i want to build the F23 bottom end for boost, then G23 the Beast. or sell it... =/

 

[CHID0]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

Bolted it in without the IM? Isn't that a PITA to install after the motor is in the bay??

 

[99CcordMTF23]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

It's probably impossible to get it in with the intake manifold still on.The intake mani has been in and out several times since, Just gotta wiggle it a certain way, The only PITA is tightening the nuts without getting under the car. (I do ANYTHING i can to avoid getting under cars, i had a '57 belair fall on me once...)

 

[99CcordMTF23]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

I just felt like making a note, I used the prelude alternator and power steering brackets, and the prelude pump, with the accord lines, and pulley. A few little bends and it looks fantastic, unfortunately, I'm going to need a shorter belt, by like an inch or so.

 

[b18lsturbo]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

i dropped my swap in with everything on it and i used every thing from the f23 but power steering is from prelude

 

[99CcordMTF23]

Re: 99CcordMTF23's H22-Swap thread! Update, 6/6/12, pics pg2!

WEll, Everything is in so far. The header was a Beast... But eh, Anyways... Intake manifold in, All my Wiring is almost Finished except the damn Dizzy. And not i'm working on fuel lines and My cables. I can almost taste it... And feel the Vtec kick me in the Azz.