B series TB on J32a2 lopey/surge idle?

Discussion in 'Engine & Transmission Mods' started by 98V6Accord, Nov 19, 2019.

  1. 98V6Accord

    98V6Accord Well-Known Member

    Posts:
    82
    Likes Received:
    1
    Joined:
    Mar 8, 2012
    Location:
    Md
    I have a j32a2 6mt 98 accord

    Stock 03 Cl ecu.

    I have a skunk 2 b series 74mm Tb.

    I'm getting the lopey surging idle after I give it gas.

    I've tried to do the relearn procedure. Tried multiple different hoses. Could it be the throttle cable? Anybody have a b series TB on a J?


    [​IMG]

    I have this adapter and the throttle cable plate.

    My only other option is to use the stock j32 tb :-/

    Thx in adv
     
  2. Tito_CG3

    Tito_CG3 Member

    Posts:
    15
    Likes Received:
    1
    Joined:
    Dec 23, 2014
    Location:
    California
    Any luck yet. I been tempted on buying that p2r plate adapter. Do you feel any gains with the 74mm throttle body.
     
  3. 98V6Accord

    98V6Accord Well-Known Member

    Posts:
    82
    Likes Received:
    1
    Joined:
    Mar 8, 2012
    Location:
    Md

    I just made a thread in Tech.

    I swapped back to CL stock TB, but it's Auto...not sure if that's my issue.

    Idled fine! Had an issue with map sensor and it went into limp mode.
     

Share This Page