Complete DIY for vss after 5spd swap 1st post

low430

Well-Known Member
Joined
Feb 23, 2009
Posts
246
Reaction score
5
Location
Portland
Re: vss wiring after 5 spd swap( lots of pics)

I would also like to know as Im up **** creek right now.
 

Drift

Well-Known Member
Joined
Aug 8, 2007
Posts
1,333
Reaction score
22
Location
Mass
Re: vss wiring after 5 spd swap( lots of pics)

c12vsscircuit.jpg


C102VSScircuit.jpg


ECUVSScircuit.jpg


gaugevsscircuit.jpg


S84VSScircuit.jpg


connB.jpg


9899vsscircuit.jpg


0002vsscircuit.jpg



I have posted these in a few other VSS threads, not sure why they arent making it to the search function.
 
Last edited:

9450erick

Well-Known Member
Joined
Oct 12, 2009
Posts
1,000
Reaction score
6
Location
los angeles
Re: vss wiring after 5 spd swap( lots of pics)

drift i have these pics and even printed them out but many things dont add up and the colors dont match
it also says u need b14 (drivers under dash fuse relay box.) wheres that
and the vss signal does not come from that big grey plug it comes from here (the one that im holding)
picture.php
. according to turbowa
anyone with pics of doing this.
 
Last edited:

F23A1AT

Well-Known Member
Joined
Aug 11, 2008
Posts
2,328
Reaction score
16
Location
Gainesville, FL
Re: vss wiring after 5 spd swap( lots of pics)

I would also like to see further insight on this. When I fix my CG I refuse to replace to autocrapic, and we all need to know how fast we are going. Best I can figure One would need to find the speed sensor wire on the AT harness (the infamous Blue/White wire?) And then just splice it into the new M/T VSS signal wire. Of course after re-pinning it from C23 to B2 (I think that is the right process).

-> Drift Maybe if you could tell us something with these pictures instead of just posting them up it would help a little more.
 

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
9,870
Reaction score
85
Location
Ohio
Re: vss wiring after 5 spd swap( lots of pics)

My version of Turbowa's horrible and very hard to understand writeup. I'm not completely sure it's right but all of my connections are showing continuity. I just haven't ran a power for the manual VSS yet.

l337 MS Paint skillz -

5spdwiring.jpg



All the other stuff he has in there about A/C and other connectors and crap I don't get.
 

9450erick

Well-Known Member
Joined
Oct 12, 2009
Posts
1,000
Reaction score
6
Location
los angeles
Re: vss wiring after 5 spd swap( lots of pics)

is turbowa still a member. it would be great if he refined his thread.
is he the only one that has a official thread.
ive been searching nd all i can find is people asking how to connect this
blk accord that kinda helped but where are the speedo wires and the 18 green connector. other wise i can follow and if this works i will personally post a diy so no more confusion
 
Last edited:

low430

Well-Known Member
Joined
Feb 23, 2009
Posts
246
Reaction score
5
Location
Portland
Re: vss wiring after 5 spd swap( lots of pics)

i will personally post a diy so no more confusion

YA I posted some info in my thread bercause just to get the car started there was bad info on which wires to solder together, after trying pretty much every variation of blue black etc I went to honda for the wiring diagram and then got it started.
we need a DEFINITIVE Guide, and I would be willing to contribute.
 

BlkCurrantKord

Super Moderator
Joined
Sep 7, 2005
Posts
9,870
Reaction score
85
Location
Ohio
Re: vss wiring after 5 spd swap( lots of pics)

Turbowa is probably still on here as a name but doesnt post, he only posts on Honda-Tech. The speedo wires would be...behind the speedometer.

As far as the 18pin connector, I'm still trying to figure out what it was he did there b/c it really doesnt make sense. Half his writeup sounds like him moving wires around that he didn't need to.
 

Latest posts

Back
Top