f22a head on f23 block

RobS763

Active Member
Joined
Apr 9, 2012
Posts
36
Reaction score
1
Location
Minneapolis
hi everyone, im sure this has been gone over in the past but i cant find a clear cut answer.
Im looking to rebuild an f22a head that i have sitting in the garage and doing a hybrid with an f23 block.
Im curious about what i need to do about wiring when i put the head on the block...what do i need to convert as far as the sensor on the head and running an f22a6 IM. I plan on either running a pt6 of p12 ecu. This is my first time doing a hybrid build, and im in no real rush to get it done.

Also, im looking into cams i was thinking about a delta 260 for drivability seeing as it will be a DD, from what ive been reading the 272 can give a real loopy idle....

Im wanting to do this build more for the hell of doing it, it is not by any means gonna put out great numbers, but looking for a little get up and go when needed. let me know what you guys think and if you have any suggestions id really appreciate it.
thanks in advance!!!!
 
Back
Top