Lug nuts for xxr wheels

Caliaccord02 · Jun 10, 2015

I'm about to order some xxr 521's and was also looking into buying lug nuts for them. I have researched some and found that some say the Muteki SR48 fit and others say they will not fit. Can someone give me a definite answer before I order the wrong lugs. I was looking into these. http://www.amazon.com/Muteki-SR48-Black-Open-12x1-5/dp/B003DXDTCC

Sketch o5 · Jun 11, 2015

as long as the threads are 12x1.5 and the lug nuts have a conical seat, you're good to go. the ones in your amazon link would work.

truWarier02 · Jun 11, 2015

You should be fine but IIRC, someone had tried Rays nuts that are similar to the SR48 but the lug nut seats on some XXR wheels are a bit narrow. I had SR48's on my XXR wheels back then and they fit fine. But if you don't plan on running extended studs, a safe bet would be the Gorilla tuner lug nuts. They'll certainly fit.

Caliaccord02 · Jun 11, 2015

I plan on running Ichiba spacers that come with the pressed in extended studs when I lower my car in the next few months. So am I still able to use Muteki SR48 Open End Lug Nuts without the extended lugs until then?

Sketch o5 · Jun 11, 2015

yeah, you should be fine as long as they're the same 12x1.5 thread on the studs...and if you buy them specifically for an accord, they will be, so you'll be good.