P0386 - Please help!

[Styx2015]

2000 Honda Accord EX
- J32/35 6 speed true manual swap including ECU and engine wiring harness.
- Need to pass emissions, only have one code left.

P0386 - Crankshaft Position Sensor B Range - Performance

I replaced crankshaft position sensor B (on the clutch housing on the 03 CL-S 6 speed), and I still have a code. Any ideas?

 

[xci.ed6]

 

[xci.ed6]

But, check wiring first. Very (more) common for wiring before that.

 

[Styx2015]

These pictures don't help at all. The CKP Sensor listed is the A or #1 sensor. My code is from the B or #2 sensor which is only found on the 03 CL Type-S. Like I said, I replaced the sensor that goes along with the P0386 code without any luck.

 

[xci.ed6]

Then check wiring.

Power + gnd

Then check continuity for signal. Output volts means it works, when connected! Still power output? Check sensors signal LINE, odd **** will not look like wheel, so internal engine probs. No? Dead ecu.