SOLD 5-17-2015
Box dimensions are the following: 7L x 12W x 44H
weight: about 5 ~ 7 lbs
my zip is 30741
Bought these used, way back in the day. Never installed them. Just kept them for a rainy day. I bought some black tinted tails and may use those, but not these.
Lenses are intact, no cracks. Right now the OUTER 2 lights have saran wrap like plastic on them. You can see in one of the pics, I pulled it back a bit. Center housing does NOT have any plastic wrapping on it.
Housing is in good shape, no cracks from what I can see. Weather stripping material is in good shape. Not cracked or weather beaten.
Few pics in there with an OEM to compare and show they are the same shape housing, and the OEM with gasket.
The BAD issues:
I: 1 of the mounting bolts is broken off - see pic.
II: 1 of the center piece gaskets is missing & the outer 2 light pieces have no gaskets.
* You can use the gaskets from your current RED OEM lights for these, if you wanted.
** You can get these from Honda online dealers or local, they are a bit on pricey side. bout another $25 to make this rear light assembly complete. $125 investment in these RARE Clear rear tails is not too bad...
III: 1 area of the gasket on the center portion will pull away from the housing. bout a 3 inch area. But, it looks like it may seal in that area ok, after installation. Since they are aftermarket, they wont be perfect like Honda's.
This is the broken mounting bolt in the 2 pics below:
@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@
OUTER TAILS
PASSENGER SIDE
DRIVER SIDE
Box dimensions are the following: 7L x 12W x 44H
weight: about 5 ~ 7 lbs
my zip is 30741
Bought these used, way back in the day. Never installed them. Just kept them for a rainy day. I bought some black tinted tails and may use those, but not these.
Lenses are intact, no cracks. Right now the OUTER 2 lights have saran wrap like plastic on them. You can see in one of the pics, I pulled it back a bit. Center housing does NOT have any plastic wrapping on it.
Housing is in good shape, no cracks from what I can see. Weather stripping material is in good shape. Not cracked or weather beaten.
Few pics in there with an OEM to compare and show they are the same shape housing, and the OEM with gasket.
The BAD issues:
I: 1 of the mounting bolts is broken off - see pic.
II: 1 of the center piece gaskets is missing & the outer 2 light pieces have no gaskets.
* You can use the gaskets from your current RED OEM lights for these, if you wanted.
** You can get these from Honda online dealers or local, they are a bit on pricey side. bout another $25 to make this rear light assembly complete. $125 investment in these RARE Clear rear tails is not too bad...
III: 1 area of the gasket on the center portion will pull away from the housing. bout a 3 inch area. But, it looks like it may seal in that area ok, after installation. Since they are aftermarket, they wont be perfect like Honda's.
This is the broken mounting bolt in the 2 pics below:
@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@
OUTER TAILS
PASSENGER SIDE
DRIVER SIDE
Last edited:
