Td94u start up help

[cg3low4life]

The colors from distributor are
Yellow /green
Black/grey
Orange
orange/blue
White /blue
Blue/yellow
White
bbyblue
6gen stock wire harness Crankshaft
red
Drkblue
green
White
side of distributor harness
Black/yellow
Black
Yellow
Yellow/green
Really need help on how to connect this wires

Sent from my Z970 using Tapatalk

 

[cg3low4life]

The colors from distributor are
Yellow /green
Black/grey
Orange
orange/blue
White /blue
Blue/yellow
White
bbyblue
6gen stock wire harness Crankshaft
red
Drkblue
green
White
side of distributor harness
Black/yellow
Black
Yellow
Yellow/green
Really need help on how to connect this wires

Sent from my Z970 using Tapatalk

Any one that could help me it's the aftermarket td94u

Sent from my Z970 using Tapatalk

 

[rooky]

Help you with what? your post is vague plus I had to go on a wild goose chase to figure out what specific type td94u mean. I don't know if this helps http://honda-tech.com/honda-prelude-4/just-picked-up-type-s-h22a-swap-few-questions-3249723/

 

[cg3low4life]

Rooky this is the one I got

Sent from my Z970 using Tapatalk

 

[cg3low4life]

Look on the main page sorry

Sent from my Z970 using Tapatalk

 

[james'99]

Any particular reason you'd use this over a Accord distributor?

 

[cg3low4life]

Because the f23a1 distributor doesn't fit the engine and the f20b has the crank sensor on the dostributor

Sent from my Z970 using Tapatalk

 

[james'99]

Didn't realize you were doing a swap. Maybe consider renaming your thread and adding some background information. It might draw better attention that way as there is someone on here with an F20b swap I believe.

 

[cg3low4life]

OK thanks

Sent from my Z970 using Tapatalk

 

[rooky]

Dude I want to help you but I cant find your main page much less what type of swap your doing? is it f23 block with f20b head? or f23 block with h23 head(G23) swap?

Please, next time posting a new thread make sure it has all the information and specifies what exactly you seek.