Unoffcial 5Spd swap list

[BadgerType]

These are the parts needed for a 5spd swap. CAUTION, You may or may not need all these parts and you may need un listed parts as well.


CG ONLY Parts
F23 Brake Pedal
98-00 or 01-02 MT ecu
F23 Driver side Axle
F23 Shifter
F23 Manual tranny bracket
F23 Manual tranny Mount

Any Prelude or Accord Parts (F/H Series)
Manual Transmission Complete
clutch line
Clutch Pedal Complete
Shifter Cables
Shift Boot
Shift Knob
Intermediate shaft
Your Tranny/Year Starter
8 Flywheel bolts
1 long starter bolt
Nuts and washers for shifter
nuts, washers and cotter pins for shifter cables
couple of thick washers for the master cyl
2 nuts for master cyl
nut and bolt for master cyl/pedal connection
3 c clips
year/tranny flywheel
year/tranny vss and wiring
year/tranny reverse sensor and wiring
3 bolts for intermediate shaft
clutch fluid resivoir and mount with bolts
shift fork for clutch

----------------------------------------------------------------------------

THE FOLLOWING PARTS ARE ACTUAL PARTS USED ON THE CG ACCORD. THIS IS JUST A REFFERENCE OF THE PARTS THAT YOU WILL NEED TO BUY. YOU CAN BUY OTHER GENERATIONS, ACCORD AND PRELUDE, PARTS EXCEPT FOR THE PARTS I LISTED ABOVE

(30JUN2010: I know that some links and most of the pictures don't work. when i can find a decent site beside Majestic to use, i will post up the pics/links)

http://www.hondaautomotiveparts.com...atcgry4=KA5MT&catcgry5=CLUTCH+MASTER+CYLINDER

all these parts No matter the tranny

http://www.hondaautomotiveparts.com...gry4=KA5MT&catcgry5=CLUTCH+-+TORQUE+CONVERTER

Part # 1, 2, 3, 6, 8, 12

http://www.hondaautomotiveparts.com...tcgry3=4DR+EX&catcgry4=KA5MT&catcgry5=CONSOLE

Part # 24, 40

http://www.hondaautomotiveparts.com...4DR+LX&catcgry4=KA5MT&catcgry5=DRIVESHAFT+(3)

Part # 5, 16

(no link i can find that works, it is the intermediate shaft and axle)

http://www.hondaautomotiveparts.com...atcgry4=KA5MT&catcgry5=ENGINE+MOUNTS+(MT)+(1)

Part # 1, 6, 20, 26, 28

http://www.hondaautomotiveparts.com...+EX&catcgry4=KA5MT&catcgry5=MT+CLUTCH+HOUSING

Part # 5, 12, 13

http://www.hondaautomotiveparts.com...+EX&catcgry4=KA5MT&catcgry5=MT+CLUTCH+RELEASE

Part # 1, 2, 4, 5, 7, 11, 12

http://www.hondaautomotiveparts.com...tcgry4=KA5MT&catcgry5=MT+TRANSMISSION+HOUSING

Part # 9, 16

http://www.hondaautomotiveparts.com...catcgry3=4DR+LX&catcgry4=KA5MT&catcgry5=PEDAL

Part # 14

http://www.hondaautomotiveparts.com...y3=4DR+LX&catcgry4=KA5MT&catcgry5=SHIFT+LEVER

All parts except 15

http://www.hondaautomotiveparts.com...LX&catcgry4=KA5MT&catcgry5=ALTERNATOR+BRACKET

Part # 14

 

[finch13]

Awesome dude, thank you.

 

[CG6Lemon]

thanks badger! ur da best!

 

[botang47]

this is amazing.

 

[BadgerType]

if anyone sees anything i missed, let me know

 

[CG6Lemon]

lol dam badger... maxed out respect bro!

 

[hondaspeedx]

Great work Badger! Thank you!

I had downloaded all those images from Majestic and have been fumbling through them to no avail... big help! mad props!

 

[CHID0]

Damn! great work!

 

[bjorkmae]

Hey is it possible to just wire the transmission shift position switch to nuetral instead of buying the MT ecu? Thats what I did on my 88 legend auto to manual swap and it worked fine.

 

[5spd'r]

You need to consider the differences in gear ratios between the available f/h series trannys. My '91 ex 5spd wagon is definetly geared lower than my '00 ex 5spd sedan. I'd really like a Prelude trans for my 6th gen, I think that would totally change the feel of that car.