NINaudio
Well-Known Member
- Joined
- Dec 12, 2005
- Posts
- 273
- Reaction score
- 1
OK, Just got my amp back from Audison. Supposedly, there was a bad module that they replaced. So, I hook it up last night, and just turn the accessory switch on. Yay! I have sound. OK, I go take a shower and head out for the night. In the drive across town, it shuts itself off like 4 or 5 times. Completely off, not protect mode. Crap. It would play for maybe 20-30 seconds, then shut off regardless of power level. Does the same thing on my way home later last night.
So I get home, go grab my DMM and measure some voltages. The car is idling in park, and the amp is getting 14.0v at the power connection and 13.5v from the turn on lead.
On my drive to work this morning, it turns off a few times in the first 5-10 minutes of the drive, then it remains on for the rest of the way, about 20 more minutes.
Any ideas?
So I get home, go grab my DMM and measure some voltages. The car is idling in park, and the amp is getting 14.0v at the power connection and 13.5v from the turn on lead.
On my drive to work this morning, it turns off a few times in the first 5-10 minutes of the drive, then it remains on for the rest of the way, about 20 more minutes.
Any ideas?