Recent content by Ocho

  1. Ocho

    HELP! Engine starts, engine shakes violently, then dies?

    Either full pump or ignition relay. I'd turn the key and lean back toward the back seat with everything off and turn the key to on position where the fuel pump primes and see if you can hear it prime. Sent from my iPhone using Tapatalk
  2. Ocho

    Head swap?

    I'd just rock an auto tensioner. but if you want a little more ump, get type s k20 pistons and just install them backwards and rock that 11.5:1 comp! same bore as f23. 86mm ;) You can, just beware of the clearance issues of Intake mani's in our accord. but yeah most def, 2.5 inch or 3" exhause
  3. Ocho

    H22 donor car?

    G23 is easy. I built one myself. Building another one now. I haven't had an accord for a few years but just got another one to tow my ep3. Get h22 head and buy some hex head plugs from oriellys big enough to tap 2 oil train holes on the cam gear side, use hondabond or loctite to ensure a seal...
  4. Ocho

    G23?

    G23 is easy. I built one myself. Building another one now. I haven't had an accord for a few years but just got another one to tow my ep3. Get h22 head and buy some hex head plugs from oriellys big enough to tap 2 oil train holes on the cam gear side, use hondabond or loctite to ensure a seal...
  5. Ocho

    Head swap?

    G23 is easy. I built one myself. Building another one now. I haven't had an accord for a few years but just got another one to tow my ep3. Get h22 head and buy some hex head plugs from oriellys big enough to tap 2 oil train holes on the cam gear side, use hondabond or loctite to ensure a seal...
  6. Ocho

    H22 upgrades?

    Skunk2 cams are really really great. My friends have them pro 1's and 2's and they are a great power adder. My personal fav is Brian Crower they both are great just your preference.
  7. Ocho

    FS: Another Part Out

    Pmd
  8. Ocho

    quick exhaust question

    Just order one for the 4 cyl coupe and message them at the buy and request ur model
  9. Ocho

    Price Drop!!! 7/25/12 BNIB GoPro Hero2 Outdoor Edition

    Still available
  10. Ocho

    H23A DOHC VTEC Head on F23a1 Block Question

    Ya you can do that or get 2 1/8in plug screws from golden eagle like I did and its perfect. Just need to tap the hole
  11. Ocho

    FS: Fs: Ported f23 manifold / cam gears / MSD SCI

    GLWS! Wish I wasn't building a g series lol
  12. Ocho

    Yes or No to putting on a test pipe

    To override the code a company sells a CEL fix bung that your o2 sensor screws in then you would screw that complete piece o2+bung into your test pipe and it rids you of the code. It's 60 bucks last time I checked
  13. Ocho

    H23A DOHC VTEC Head on F23a1 Block Question

    The oil lines to plug are on the cam side of the head I will take a pic of the ones to plug later after work. I have an h22 head that I'm going to use so it should be the same. I just laid the head gasket on the block and you can clearly tell which 2 lines need to be plugged cause of how off the...
  14. Ocho

    FS: Parting Out 2000 i4 5 speed sedan

    Price for 6.5 polks? Engine harness?
  15. Ocho

    What H22 tranny Should I Use?

    I'm gonna run h23 tranny for longer gears!
See more

Latest posts

Random media

070912200006
IMG 20170708 205806
map light console
100 1624
SOHC VTEC Decal
Back
Top