Search results

  1. N

    98 Accord LX dies/shuts off while driving....HELP!

    I had this intermittent problem as well. Thoroughly cleaned the intake manifold, iacv, fitv, installed new seals where needed. Changed coil inside distributor, the main relay, ignition switch. Changed the ignition module inside the distributor.... Finally! problem gone :driving:. Fuel pump...
  2. N

    Need Advice, Intermittent stall on freeway

    I had random stalls at different times. Sometimes it would restart right away, other times it would be minutes. ICM? inside the distributor was the culprit
  3. N

    JDM F23A intake manifold

    What kind of benefits are you expecting from this IM swap?
  4. N

    FS: My 2013 Sale thread (Mostly 6th Gen Coupe stuff)

    Bump for tracking number
  5. N

    What'd you do to your accord today?

    Finally! Didn't take a pic just before the cleaning, it was a lot worse. But for reference from this pic in July After. Wow was it dirty!
  6. N

    Ways to prolong the life of our AT tranny

    Since I have a 99 4cyl auto, rebuilt trans at 119k. I was wondering if the tranny goes bad, I thought of trying to find an 02 auto since they're less problematic. Shouldn't be a problem, considering if they haven't changed the ecu. Well, while searching, I saw this...
  7. N

    out with old in with new

    Oh 5th gen with 5 lug
  8. N

    VERY bright interior dome light DIY

    It is REALLY bright. I think I'll cover some of the "smt" lights with some tape or something. Just wanted to try it out. After putting it in, I'm not taking it out. lol I would go for a small led panel if you're going to do something like that.
  9. N

    VERY bright interior dome light DIY

    I put one in the glove box.
  10. N

    Guatemala yo! Updated 01/23

    Re: Guatemala yo! My home country! My mom is there too. She went to the temples, cant wait for the pics she took.
  11. N

    DIY: How to polish aluminum wheels.

    Mounted on my 5th gen. They look great, polished the center caps as best as I could
  12. N

    DIY: How to polish aluminum wheels.

    I did it with the tires mounted. I didn't use paint stripper chemical. I used the 3M strip wheel (brown, not black). Attached to the drill, taped the tire sidewall, and off I went.
  13. N

    DIY: How to polish aluminum wheels.

    I used a drill with an attachment and also a polisher. I couldn't imagine how much more exhausting that would be if doing it by hand. Sanding the wheel grit by grit is tiresome enough. I wouldn't polish another wheel ever again, just too much work, even though the wheel looks great. I...
  14. N

    DIY: How to polish aluminum wheels.

    I used In order: 3m rubbing compound - 03900 Mothers Billet Metal Polish 3M Shine Restorer plus Carnuba Wax - 03902
  15. N

    DIY: How to polish aluminum wheels.

    I finished polishing two months ago with the same EX wheels. I wouldn't skip from 800 to 1500 grit. You need to put 1000 grit in there. The best way to sand is a back and forth motion with a grit and the next grit up you sand at a 90 angle from the previous. That way you can see some of the...
  16. N

    Megan racing, stepped up their game?

    I should wrap the header, but I won't do it... Yet. The paint is doing well so far. If it does get worse, then I'll just wrap the top half of the header. Im guess the temps arent really high is because I sprayed the exterior of the header too, with that same paint. Good to know the...
  17. N

    Feedback for Good/Bad Transactions

    Member: TheBax Part: Instrument bulb holders all 5, Both 74 led bulbs, Hood prop holder, Headlight seals, Both Courtesy lenses Feedback: Very good seller. Shipped in a timely manner and all items were packed very well. Highly recommended. Bought/Sold: Bought
  18. N

    Megan racing, stepped up their game?

    I want under good temps to be low. Paint is doing its job so far.
  19. N

    Megan racing, stepped up their game?

    Thanks guys The bay will def get attention, it's bothering me as well. Taking care of other stuff before I get to that. Right now I'm clay bar the car now, the black stains need to come off. It's working too... Even did the headlights. Cleared them up a good bit. Comparo
  20. N

    Megan racing, stepped up their game?

    Finally had time. Only problem, top and bottom half screw holes were off a little. Had to open up the holes a bit. Other then that it was all good. Applied anti seize on very bolt and nut. Forgot to clean my prints off the header before turning the engine on... Now there's some discoloring as...
  21. N

    Megan racing, stepped up their game?

    DCSports? The internal exhaust coating spray sticks well to the header. When I saw how it sticks to the interior of the piping, I decided to test spray on the outside. Turned out pretty good. Yeah, I should have covered the name plate with tape. I'm still waiting for the gaskets...
  22. N

    FS: APEXi W S 1 RARE EXHAUST! sold modz lock please!

    Re: APEXi W S 1 RARE EXHAUST! new update! 150 shipped out of state Y U Lion?:furious:
  23. N

    FS: APEXi W S 1 RARE EXHAUST! sold modz lock please!

    Re: APEXi W S 1 RARE EXHAUST! new update! 150 shipped out of state why isn't this for a sedan! ah!
  24. N

    Megan racing, stepped up their game?

    I paid $151 shipped from ebay. I haven't installed it yet. After researching about the gaskets, I'm looking to replace them before I install. Having a little trouble finding the correct gaskets, but I'm still looking. I also want to try this, which I already purchased...
  25. N

    Megan racing, stepped up their game?

    Yes down pipe... After the flex pipe.

Latest posts

Random media

7713.jpeg
I was practicing my pose
I always parked my car with the wheels turned to show off arguable the sweetest looking tread pattern out there.
image
98-00 coupe front
Back
Top