Hi 6GA. So I recently purchased some Fn01rc from another member and now I need new lugs locks before someone steals them around my neighboorhood. I'm having trouble finding information about lugs that fit them. I'm not sure the thread size, seats and other info. I will greatly appreciate any information about them. If it matters, its a 4 lug 114.3 bolt pattern and 17x7. thanks in advance.
5zigen fn01rc lug nuts
- Thread starter itzcoryng
- Start date
LeAccord
Well-Known Member
You need 12x1.5 threaded tuner lugs.
Like these, http://www.ebay.com.au/itm/PROJECT-...ccessories&hash=item4d00b2d502#ht_1283wt_1058
but another brand.. unless you really want to pay nearly $300 for them
Like these, http://www.ebay.com.au/itm/PROJECT-...ccessories&hash=item4d00b2d502#ht_1283wt_1058
but another brand.. unless you really want to pay nearly $300 for them
Last edited:
You need 12x1.5 threaded tuner lugs.
Like these, http://www.ebay.com.au/itm/PROJECT-...ccessories&hash=item4d00b2d502#ht_1283wt_1058
but another brand.. unless you really want to pay nearly $300 for them
Thanks for your quick help response. Those lug almost cost more than what I paid for the rims lol.
LeAccord
Well-Known Member
You're welcome. Don't know if you have lugs already and are only looking for lock lugs but these are good. Theres other colours, and other lengths available.. Depends on what you want 
http://www.ebay.com.au/itm/20pc-RAY...ccessories&hash=item3f0f1b0b6a#ht_4247wt_1008
http://www.ebay.com.au/itm/20pc-RAY...ccessories&hash=item3f0f1b0b6a#ht_4247wt_1008
LeAccord
Well-Known Member
There are a lot of fake lug nuts on ebay. TBH, im brand loyal lol, but i wouldn't buy any lug set that is under $100.. There are quite a few; muteki, project mu, volks, project kics, works.. They all range from about $120 - 200. Just decide on which ones you like, as they all look a little different (colour, design or length)
Fake brand or knock offs will strip after a few times of tightening them onto the stud.
Fake brand or knock offs will strip after a few times of tightening them onto the stud.
I found these muteki on ebay for 52$. These will fit right? Thanks again. Repped.
http://www.ebay.com/itm/MUTEKI-RED-...Parts_Accessories&hash=item415c6d684f&vxp=mtr
LeAccord
Well-Known Member
They will indeed fit, but they don't include lock nuts..
And yes 12x1.5 acorn seats because you're using it on an aftermarket rim. Stock honda wheels require ball seat lug nuts.
These include lock nuts.
http://www.ebay.com/itm/MUTEKI-CLOS...Parts_Accessories&hash=item256866a0b1&vxp=mtr
Last edited:
