6th Gen Forced Induction members and their numbers

[1bad6]

I've often wondered who else on the site has forced induction Accords. I know of a few from my interactions with some of the guys, but there is no central list to refer to so I'm creating one here that I'll update with the most current numbers that I know of and I'll add members as they finish and tune their builds. It's broken down by member name, location, and engine type...lowest HP to highest. Some of these guys still have their cars and some don't. If your name is on the list and you have updated numbers, PM me and I'll revise as we go forward. If you've newly completed your build and tune or if I forgot to include your completed build, PM me and I'll add your name to the list as well. Enjoy!

*Cars are turbo unless otherwise denoted*


F23 Turbo

DRACORD (Michigan): 203whp 210wtq

AKOUTMOS (New York): 211whp 204wtq

RUSSIANRED (Maine): 214whp 223wtq

GREEKPIZZA (Virginia): 221whp 216wtq

X5CARL3TMURD3RX (Virginia): 230whp 240wtq

SNOOBLY (Iowa): 260whp 270wtq

1NONLYACCORD (Atlanta): 306whp 298wtq

EMMINODAGREAT (Atlanta): 360whp 360wtq (sold the car)

IHAZSNAIL (New York): 363.29whp 314.08wtq

HOTACCORD243 (Minnesota): 368whp 335wtq

AFAccord (South Carolina): 416.5whp 397.6wtq


J3* Turbo

AZNFUNKYFLIP (California) SupChrgd J30: HP: ?? Torque: ??

BOOSTEDV6 (Canada) SupChrgd J30: HP: ?? Torque: ??

HOTFINWAX (California) SupChrgd J30: 264whp Torque: ??

MIKEYMIKE (New York) SupChrgd J35: 325.31whp 299.17wtq

MONEYPIT (Oregon) J35 Block, J32 Heads: 388whp 412wtq


H22 Turbo

1BAD6 (Atlanta): 487.02whp 348.0wtq

SIMON_Y (Ontario): 526.1whp 362.7wtq

 

[SykVSyx]

t.blackaccord had a S/C J30, I will see if I can find out the numbers.

b1l@l is also boosted and so is Steverino(although I don't think he is on here).

They are in Canada as well.

 

[akoutmos]

Those are old numbers .....I haz 5 moar pounds of boost now.

Maybe i'll redyno today and update this along with dyno chart

 

[hotaccord243]

Those are old numbers .....I haz 5 moar pounds of boost now.

Maybe i'll redyno today and update this along with dyno chart

Good to hear!

Should be making more progress in the next few weeks as well!

 

[akoutmos]

I wanna see what kinda numbers you put down buddy!!

Also, if you are looking for an accurate and free dyno, take a look at VirtualDyno(http://www.bradbarnhill.com/projects/VirtualDyno/). All you have to do is take a log in AEMPro (make sure you have the correct parameters up so you log the necessary data). Do like a single gear pull(i use third). Then in AEMLog, trim the data to the beginning and end of the run so you have just the data for the run. Export the data to a text file and feed that into VirtualDyno.

Unforunately, VirtualDyno does not have presets for the Accord, but i have found where the developer keeps the XML files for that info. I'm in the process of making a custom XML file for the Accord, but need a little more information. For now i just use a Prelude preset with the gear ratio's fixed for the accord. It is actually very accurate and repeatable. While this graph will not be 100% accurate, due to using prelude parameters, the important thing to note is HP/TQ changes after changes to your tune are made (basically the same exact thing you do on an actual dyno).

Here is the dump of the XML file for the Prelude. I'm at work right now, so i don't have access to the working accord copy on my computer, but if you guys can fill out all the info i can make a custom accord calibration and write a script to install it to the correct directory. If you can't read XML this is what i need:
Frontal Area and Drag Coefficient (right now just using estimates)

<?xml version="1.0" standalone="yes"?>
<CarDataset xmlns="http://tempuri.org/CarDataset.xsd">
<CarParameters>
<CarMake>Honda</CarMake>
<CarModel>Accord</CarModel>
<CarSubModel>DX</CarSubModel>
<StartYear>1998</StartYear>
<EndYear>2002</EndYear>
<Weight>2990</Weight>

<TransTypeManual>true</TransTypeManual>
<TransGear1>3.285</TransGear1>
<TransGear2>1.777</TransGear2>
<TransGear3>1.193</TransGear3>
<TransGear4>0.903</TransGear4>
<TransGear5>0.685</TransGear5>
<FinalGearRatio>4.062</FinalGearRatio>

<DragCoefficient>0.33</DragCoefficient>
<FrontalArea>21.0</FrontalArea>
<TireDiameter>24.07</TireDiameter>
</CarParameters>
</CarDataset>

Info from: http://www.honda.com/newsandviews/article.aspx?id=2002040259120

 

[hotaccord243]

Thanks! and right back at you, I wanna see what you put down as well!

You know I have heard something like that was around but never looked into it, that is some great information! I'll have to try that out when i'm ready no doubt on that to see how accurate it is right before I get on an actual dyno!

Looks pretty easy to set your own parameters and set it up to be in line with our specs for our car. Pretty bad a**. Repped for this one buddy!

 

[akoutmos]

Thanks for the REP! I gotta catch up to the Russian

It seems like he has some sort of "add your own car spec" features, but hasn't fully implemented it. I'm actually gonna contact the developer and see.

In addition, i'll try to put a DIY dyno thing together tonight with my car if people are interested.

 

[hotaccord243]

Those Russians are hard to catch up to.

You totally should, because if you do that, i'll try it out as soon as I can. If I can help let me know, otherwise i'll be following closely on this one.

 

[1bad6]

t.blackaccord had a S/C J30, I will see if I can find out the numbers.

b1l@l is also boosted and so is Steverino(although I don't think he is on here).

They are in Canada as well.

Cool. PM me their numbers and I'll update the list.

Those are old numbers .....I haz 5 moar pounds of boost now.

Maybe i'll redyno today and update this along with dyno chart

PM me.

Good to hear!

Should be making more progress in the next few weeks as well!

Thanks for the PM. The list has been updated.

 

[1NonlyAccord]

Ill update my secret build thread and numbers after IA april 22