98 Accord LX 2.3 Wiring

mikewohlwend

Well-Known Member
Joined
Apr 15, 2015
Posts
69
Reaction score
0
Location
Ohio
I have a couple plugs that I am not sure about on my car. Can anyone help with where they go?

1. Gray plug - Green & Black wires located in the bundle with the distributor plug

2. Green plug - Red & Blue wires located in the bundle with the distributor plug

3. Gray plug - Black with silver dots & Blue with silver dots & white stripe wires located in the bundle with the fan plug

4. Gray plug - Red with silver dots wire located in the bundle with the fan plug

I wanted to post pics to go with this, but I'm not allowed yet.
 

Hoff Daddy

Well-Known Member
Joined
Feb 19, 2014
Posts
104
Reaction score
1
Location
Missouri
Send em to me. I just swapped a jdm f23a1 into a usdm car that used to have a usdm engine. I'm not really an expert, but I can say I've seen both and there was a few differences between mine.
 

mikewohlwend

Well-Known Member
Joined
Apr 15, 2015
Posts
69
Reaction score
0
Location
Ohio
Just sent a copy of my post on another forum. I am using the stock wiring. JDM motor didn't come with a harness
 

mikewohlwend

Well-Known Member
Joined
Apr 15, 2015
Posts
69
Reaction score
0
Location
Ohio
www . hondaaccordforum . com/forum/general-tech-help-7/98-accord-lx-2-3-wiring-61417/
 

mikewohlwend

Well-Known Member
Joined
Apr 15, 2015
Posts
69
Reaction score
0
Location
Ohio
I believe Hoff Daddy has them figured out.

1. Coolant temp sensor
2. VTEC
3. Larger electric fan
4. A/C clutch
 

Latest posts

Back
Top