Blackcord's 2002 I4 Accord Sedan EX-L

[blackcord]

hey you car looks really clean, i have a 2002 accord as well and i was wondering how you got your front mugen lip to fit. i bought a mugen lip and even cut the lip a bit to fit from the front but i cant get the sides to sit in properly. Lemme kno how you did it, yours turned out sick

Did you cut "slits" in the front so that it fits better? Mines are about half inch too short on both sides actually, but I just use one screw on each side to hold the sides in, and I used some doublesided tape as well on the side. I didn't really have too much trouble to make it fit. Where did you get yours? Maybe different manufacturers' fits differently??

BTW, that lip is ABS crap and I am gonna get rit of it soon. I just bought a BaysonR Polyu lip which I am waiting for the weather to warm up so I can paint and install it.

Are you in the east side of Toronto? If you are, then you should come out to our east meet http://www.torontoaccords.com/viewtopic.php?f=1&t=63769 and check out my lip in person. Or you can check out the west meet http://www.torontoaccords.com/viewtopic.php?f=1&t=63768 as I am sure some members there got a mugen style lip as well on their 01-02 sedan (like 02_VTEC-SE)

 

[001Stunna]

Are you in the east side of Toronto? If you are, then you should come out to our east meet http://www.torontoaccords.com/viewtopic.php?f=1&t=63769 and check out my lip in person. Or you can check out the west meet http://www.torontoaccords.com/viewtopic.php?f=1&t=63768 as I am sure some members there got a mugen style lip as well on their 01-02 sedan (like 02_VTEC-SE)

Jonas has a full wing west kit.
OP, just gotta do some work to it and you can make it fit.

 

[brownmaninc]

yea i did cut the slits, mine are about half an inch off on the sides as well, i guess i should try the double sided tape idea, cuz i tried to screw in both screws on the side n the lip started to crack, i guess ill just go with putting one screw in lol im actually from the north side of toronto, vaughan buh im gonna start coming out to meets, when is the next meet? east and west side lol

 

[001Stunna]

yea i did cut the slits, mine are about half an inch off on the sides as well, i guess i should try the double sided tape idea, cuz i tried to screw in both screws on the side n the lip started to crack, i guess ill just go with putting one screw in lol im actually from the north side of toronto, vaughan buh im gonna start coming out to meets, when is the next meet? east and west side lol

West meets happen every week on thursday nights at sq1 (Mississauga).
East meets happen every other week on wednesday nights at agincourt mall.

 

[thatklazzickid]

OP, how does that OEM Si exhaust sound? any louder? and did you just do the rear muffler and leave the stock mid muffler or what? im really liking it man. very clean all around.

 

[Russianred]

Lovin the Nissan Maxima corner light diffuser mod! I'd love to do the same one day if I don't undergo a total LED headlight project.

 

[blackcord]

OP, how does that OEM Si exhaust sound? any louder? and did you just do the rear muffler and leave the stock mid muffler or what? im really liking it man. very clean all around.

It is just a pinch louder than stock (hardly noticable), The only time I can hear it is when I rev over 3000rmp and when I gas it thru an overpass/bridge. I have a short vid/sound clip in my post here: http://www.6thgenaccord.com/forums/showthread.php?t=41521

Lovin the Nissan Maxima corner light diffuser mod! I'd love to do the same one day if I don't undergo a total LED headlight project.

Thanks bro, and it was pretty easy to do too.

 

[potholesloveme]

where did you find your lip? i can never seem to find one that fits an 02 bumper D:

 

[potholesloveme]

didnt read. *facepalm.

 

[Tha Cray Wonton]

Ive been considering doing a ver similar build to this one, but when I went to get a body shop to see if they can do foglights on my stock bumper they said it's impossible :/