front wheel moved back from accident

[SlammedAccord]

ok so i hit a pole and it all was hit from the front driver side wheel. now i replaced control arm, stabilizer link, rack and pionion with the outer tie rods. okay after i wreck the wheel was touching the frame behind the wheel and now it moved up but still about a finger and a half too close from the frame. the passager side it 3 fingers and a half and driver side is 2 fingers. help please!

https://drive.google.com/file/d/0By0NS_u3JPGSNWltOVZfVXZrNTFqZHc3SG91aEk4bFhkOGE4/edit?usp=sharing
how it is now after wreck

https://drive.google.com/file/d/0By0NS_u3JPGSdXV0em9HZUk5ZHB2UlhMNFp6RE50WnJRTXc4/edit?usp=sharing
passanger side

 

[kn0x47]

some part was not installed correctly or something else is bent. you'll just have to get under there and look

 

[SlammedAccord]

everything was installed professionally but i cant see what eles is bent evrything looks right

 

[SlammedAccord]

need help please!

 

[Varnell]

Looks you need to take it to a collision repair expert to make sure the frame is how it should be.

 

[G_OHH562]

Take it to a body shop with a frame rack. Then they'll let you know what is bent and what needs to be pulled.

 

[lmayoral2191]

Get an alignment check man, only your caster might be off. Caster doesnt cause any type of tire wear, it can cause a pull or drift above .5 of a degree.