Hub Bearing

[mello_jdm]

Hello Everyone. I need to change my rear bearing and rear rotor. I am not sure how much this sell for or what are the best brands. I found few on ebay, so I am hopping someone can advice me on them or recommend a better option. Thank You all.

rear rotor
http://www.ebay.com/itm/REAR-KIT-PE...iter_Display:3.0L&hash=item2c89886d34&vxp=mtr

front/rear rotor
http://www.ebay.com/itm/Front-Rear-...onda|Model:Accord&hash=item4add314180&vxp=mtr

hub bearing
http://www.ebay.com/itm/Rear-Wheel-...iter_Display:3.0L&hash=item35b4255ec0&vxp=mtr

http://www.ebay.com/itm/2-NEW-Rear-...iter_Display:3.0L&hash=item43cf06f095&vxp=mtr

http://www.ebay.com/itm/Wheel-Beari...iter_Display:3.0L&hash=item2583dd9719&vxp=mtr

 

[RedRyder]

I would go with OEM for the bearing at least

 

[twofast4u]

For bearings, I would go OEM or Timken. Timken is pretty reputable and is pretty close to OEM.

 

[xci.ed6]

http://www.hondaautomotiveparts.com...5weZ_6F-qhBfhKYaDBHtbEUnHK0cltNeIIaAh7o8P8HAQ

 

[mello_jdm]

Do I buy the oem hub bearing from hondapartsnow.com or from where else?

 

[xci.ed6]

never went there.

Online-got a few days

Local-need it now!

 

[mello_jdm]

Ok here is from the page xci.ed6 posted. So i just buy the #002 hub, assbly? Ans does I by two Qty or they come as a pair?

http://www.hondaautomotiveparts.com...catcgry4=KA4AT&catcgry5=REAR+BRAKE+(DISK)+(2)

 

[WHEEELMAN]

Ok here is from the page xci.ed6 posted. So i just buy the #002 hub, assbly? Ans does I by two Qty or they come as a pair?

http://www.hondaautomotiveparts.com...catcgry4=KA4AT&catcgry5=REAR+BRAKE+(DISK)+(2)

You need 2 of those.


** on the column on the left side of the page beside "Description" it lists:
"Reqd Qty" 2 for the part # 42200-S87-C52




I searched for about 5 minutes looking at online Honda parts and Acura parts dealers and found that Majestic Honda to be the route to go. BK honda has them for the exact same price $132.37

 

[mello_jdm]

Thank you all

 

[RawCarnage]

if you havnt bought them yet, i bought mine at rockauto, the bearing that is for like 20-30$ i dont quite remember. but all i did was remove the spindle and took it to a local shop and they replaced it for 20$.