Spyder
Well-Known Member
I'm wiring up my CD player right now and I have a problem. I'm going off of the write up that was stickied in the D-I-Y forum.
1st quick ? is there 2 thing that were supposed to plug into the back of my stock tape player. There's 2 slots, but I can't remember if I unplugged 2 things or not cause I only see one in that abyss in my dash.
Now I'm soldering everything to the existing wires in the dash and I'm using the wiring diagram from installdr.com and from my manual.
So far I have the left front and rear, ground, and right front done. Now the wiring diagram on installdr shows that the right rear is a brown and white wire and a red w/yellow. Well the other problem is that the 12v ignition wire is yellow w/red and I only have 1 red & yellow wire and it looks to be twisted in the harness with the brown and white. So which one is the 12v ign wire?
Also on installdr they say the 12v battery wire is white w/yellow. I HAVE NO WHITE w/yellow wire at all!!!!!
I have a white w/red stripe wire that goes to nothing
I have a white w/green strip wire that goes to nothing
And I have a red w/black stripe that goes to nothing
I need help asap cause I'm finishing this up tommorrow AM
so in brief summary
#1. Is there more than 1 harness that was supposed to go on the back of my tape deck.
#2. Which wire is the +12volt Ignition wire?
#3. Which wire is the +12volt Battery wire?
1st quick ? is there 2 thing that were supposed to plug into the back of my stock tape player. There's 2 slots, but I can't remember if I unplugged 2 things or not cause I only see one in that abyss in my dash.
Now I'm soldering everything to the existing wires in the dash and I'm using the wiring diagram from installdr.com and from my manual.
So far I have the left front and rear, ground, and right front done. Now the wiring diagram on installdr shows that the right rear is a brown and white wire and a red w/yellow. Well the other problem is that the 12v ignition wire is yellow w/red and I only have 1 red & yellow wire and it looks to be twisted in the harness with the brown and white. So which one is the 12v ign wire?
Also on installdr they say the 12v battery wire is white w/yellow. I HAVE NO WHITE w/yellow wire at all!!!!!
I have a white w/red stripe wire that goes to nothing
I have a white w/green strip wire that goes to nothing
And I have a red w/black stripe that goes to nothing
I need help asap cause I'm finishing this up tommorrow AM
so in brief summary
#1. Is there more than 1 harness that was supposed to go on the back of my tape deck.
#2. Which wire is the +12volt Ignition wire?
#3. Which wire is the +12volt Battery wire?