LowerMyCG5
Well-Known Member
Re: Ingalls Camber kit
If its only 2 arms I think that's for toe adjustment,
If its only 2 arms I think that's for toe adjustment,
FS: Ingalls rear camber kit.
- Thread starter wsdrummer06
- Start date
wsdrummer06
Well-Known Member
Re: Ingalls Camber kit. Details revised 12/2
Help me buy new rims!
Help me buy new rims!
Pumpingiron
Active Member
Re: Ingalls Camber kit. Details revised 12/2
The sleeve in the bushings are free? I mean is not like oem how you need to unload them at car height seat?!
The sleeve in the bushings are free? I mean is not like oem how you need to unload them at car height seat?!
wsdrummer06
Well-Known Member
Re: Ingalls Camber kit. Details revised 12/2
I'm not sur how to answer that question sorry! Maybe someone can chime in on that?
I'm not sur how to answer that question sorry! Maybe someone can chime in on that?
kn0x47
Senior Member
Re: Ingalls Camber kit. Details revised 12/2
Well I don't know what car height seat means but the bushings are not designed to come out neither are the sleeves. The ends of the rods are one piece
Well I don't know what car height seat means but the bushings are not designed to come out neither are the sleeves. The ends of the rods are one piece
Pumpingiron
Active Member
Re: Ingalls Camber kit. Details revised 12/2
Is the bushing sleeve free floating like in a ES kit? You know the metal sleeve is not attatched to the rubber, oem ones the sleeve is fixe with the rubber (that´s why you should torque arms with the car in is ride height/in the ground)??
car height seat...yeah it´s a fail loooll i mean "ride height"!!
Is the bushing sleeve free floating like in a ES kit? You know the metal sleeve is not attatched to the rubber, oem ones the sleeve is fixe with the rubber (that´s why you should torque arms with the car in is ride height/in the ground)??
car height seat...yeah it´s a fail loooll i mean "ride height"!!
Last edited:
wsdrummer06
Well-Known Member
Re: Ingalls Camber kit. Details revised 12/2
It is all attached. Bushing and sleeve wont move. my shipped price to Portugal would be 120 total
It is all attached. Bushing and sleeve wont move. my shipped price to Portugal would be 120 total
Re: Ingalls Camber kit. Details revised 12/2
This is new to me.
On one side, I thought both arms were needed to adjust camber.
But turns out one arm is for toe and one arm for camber?
Isn't the rear toe already adjustable from the factory?
This is new to me.
On one side, I thought both arms were needed to adjust camber.
But turns out one arm is for toe and one arm for camber?
Isn't the rear toe already adjustable from the factory?
kn0x47
Senior Member
Re: Ingalls Camber kit. Details revised 12/2
you do need two arms on one side to adjust camber. but technically if you dont adjust both arms the same amount then you're actually adjusting the toe. rear toe is adjustable from the factory
you do need two arms on one side to adjust camber. but technically if you dont adjust both arms the same amount then you're actually adjusting the toe. rear toe is adjustable from the factory
wsdrummer06
Well-Known Member
Re: Ingalls Camber kit. Details revised 12/2
Is there any way I can close this and start a new thread? I just wanna sell something here lol lets get it straight ppl toe is factory adjustable and camber isn't. I have 4 bars... 2 make camber adjustable and the other two I got to have a beefier than stock toe set.
Is there any way I can close this and start a new thread? I just wanna sell something here lol lets get it straight ppl toe is factory adjustable and camber isn't. I have 4 bars... 2 make camber adjustable and the other two I got to have a beefier than stock toe set.
