1NonlyAccord
Well-Known Member
shiii...my corrected mount is still in the box in my room..haha ill get around to installing it maybe eventually.ha
Innovative Mounts
- Thread starter FunnyVictor86
- Start date
cantafordaccord
Well-Known Member
- Joined
- Oct 17, 2006
- Posts
- 982
- Reaction score
- 4
You probably should, I doubt that uneven wear/pressures on the bushings is any good for them. :jarred:
cantafordaccord
Well-Known Member
- Joined
- Oct 17, 2006
- Posts
- 982
- Reaction score
- 4
got my mounts they appear to be the redesigned ones!!!
i'll update when I check for shure however i'm about as shure as I need to be after compaing pics.
i'll update when I check for shure however i'm about as shure as I need to be after compaing pics.
1NonlyAccord
Well-Known Member
Finally installed the corrected version of the Transmission mount today!
Took me 2 hours with basic hand tools. Did not fit 100% without minor changes with a grinder and reamer.
But must say,Motor does not move at all now.
as for the slight adjustments made to fit;
Innovative mount is a tad "thicker/wider" than OEM,so I used a grinder to shave off some urethane around the middle bolt slide through area
2nd) the bottom 2 holes did not line up 100%,so making them a TAD larger made them bolt right up.
Took me 2 hours with basic hand tools. Did not fit 100% without minor changes with a grinder and reamer.
But must say,Motor does not move at all now.
as for the slight adjustments made to fit;
Innovative mount is a tad "thicker/wider" than OEM,so I used a grinder to shave off some urethane around the middle bolt slide through area
2nd) the bottom 2 holes did not line up 100%,so making them a TAD larger made them bolt right up.
1NonlyAccord
Well-Known Member
where can you buy the optional front mount? like in the 1st page?
