J32A2 into a 6th gen... possible or not?

[sportyaccordy]

I have not been able to find a solid answer here or on V6P.

Can I swap the J32A2 into a 6th gen onto the 6th gen 4A?

If not, can I swap the J32A2 cams + IM, and what would I need 1 for the tranny to shift right and not explode, and 2 to make the most of the new parts engine management wise?

 

[jbisselwhiteac6]

is this a serious question you need to search
But since you asked a j32a2 is a direct swap from the j30a1 however you will need either a 6 speed or 5sp auto tranny in order to use this motor cause the 4sp auto will not work with the ecu designed to run the j32a2. You will also need the wire harness and some repinning of the ecu it can be done. Also you can swap cams from the j32a2 into a j30a1 but im not to sure about the intake manifold

 

[JMillerUA6]

Cleaning up 6GA one thread at a time................